| Wheelbase | 67.91ft in |
|---|---|
| Shipping Weight | 1105 kg |
| Turning Radius With Brakes | 2.75 m |
| Turning Radius Without Brakes | 9.85ft in |
| Number Of Cylinders | 3 |
| Rated Engine Speed | 2500 rpm |
| Engine Model | 3TNV88C-NJT |
| Engine Manufacturer | Yanmar |
| Family | GYDXL1.57TDA |
| Power Take-Off (Pto) Power | 30.4 hp |
| Engine Type | Direct Injection |
| Injection Pump Type | Direct Injection |
| Emissions Compliance | Final Tier 4 |
| Cylinder Liners | Cast-In-Block |
| Compression Ratio | 19.1:1 |
| Gross Power | 36.8hp |
| Lubrication | Pressurized |
| Cooling System | Water pump |
| Air Cleaner | Dual element |
| Engine Torque At Rated Speed | 101.4 Nm |
| Displacement | 95.7cu in |
| Aspiration | turbocharged |
| Fuel Tank Capacity | 8.5gal |
| Bore | 3.4in |
| Stroke | 3.6in |
| Crankcase - With Filter | 4.5 L |
| Battery Size | 500 CCA |
| Alternator (12-V) | 85 amp |
| Starter Size | 1.9 hp |
| Fuel System Type | Direct Injection |
| Standard | Rear – 540 rpm, Mid – 2000 rpm |
| Control | Independent |
| Clutch | Independent |
| Brake (For Mid And Rear Pto) | Wet disc |
| Cruise Control | Standard |
| Brakes | Wet disc |
| Steering | Power steering |
| Axle Capacity | Front – 880 kg, Rear – 1089 kg |
| Creeper | No |
| Front | R1 Ag 7.00-12, R3 Turf 23×8.50-14, R4 Industrial 23×8.50-14, R3 Turf Radial 200/60 R15 |
| Rear | R1 Ag 12.4-16 R3 Turf 14-17.5, R4 Industrial 14-17.5, R3 Turf Radial 300/70 R20 |
| Maximum Operating Pressure | 2500psi |
| Draft Control Sensing | Position control |
| Pump Rated Output | Steering – 15 L/min, Implement – 20.2 L/min |
| Pump Type | Gear |
| Hydraulic Type | Open Center |
| Final Drive Type | Spur Gear |
| Differential Lock | Yes |
| Category | Category 1 |
| Rollover Protective Structure | Foldable, ASABE S478 |
| Platform - Flat/Straddle | Flat |
