| Wheelbase | 108.9ft in |
|---|---|
| Front Axle Clearance | 18.5in |
| Front Tread Range | 1485-2438 mm 58.5-96 in. 1714 to 2122 mm 67.5 to 83.5 in. |
| Approx. Shipping Weight | 13657lb |
| Rear Tread Range | 1604-2302 mm 63.1-90.6 in. |
| Turning Radius Without Brakes | 6.96ft in |
| Limited Slip Differential | Yes |
| Engine Manufacturer | John Deere PowerTech PVS |
| Cylinder Liners | Wet-sleeve |
| Fuel Tank Capacity | 71.3gal |
| Displacement | 415cu in |
| Aspiration | Single variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation |
| Underhood Muffler | Yes |
| Standard | Independent 1-3/8 in., 540/1000 reversible shaft |
| Optional | 1-3/8-in. 540/540E/1000 reversible shaft or 1-3/8-in. 540E/1000/1000E reversible shaft |
| Pto Actuation | Electrohydraulic |
| Advertised Engine | 155hp |
| Advertised Pto | 90 @ 2100 kW 121 @ 2100 hp |
| Clutch, Wet/Dry | Wet |
| Creeper | Included with IVT |
| Reverser | Left-hand base |
| 2wd | Front 11.00-20 in.Rear 480/80R46 |
| Mfwd | Front 380/85R30Rear 480/80R42 |
| Pump Rated Output 1 | 30.1gal/min |
| Maximum Operating Pressure | 2900psi |
| Sensing Type | Electronic lower link |
| Joystick Scv Control | Mechanical or electronic |
| Hydraulic Type | Closed-center, pressure/flow compensated |
| Final Drive Type | Inboard planetary three pinion |
| Differential Controls | Electrohydraulic |
| Availability | 'Front YesFront & Rear Yes' |
| Axle Type | Rack and pinion |
| Brakes, Type And Control | Hydraulic wet disk |
