Contents
Cab
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 9 in (22 cm) |
| Bucket Pin Height – Maximum Lift | 9 ft (3 m) |
| Clearance at Max Lift and Dump | 7 ft (2 m) |
| Clearance at Maximum Lift and Dump | 84 in (213 cm) |
| Departure Angle | 41 degrees |
| Ground Clearance | 10 in (25 cm) |
| Length – Track on Ground | 59 in (150 cm) |
| Length – with Bucket | 11 ft (3 m) |
| Length – With Bucket on Ground | 129 in (328 cm) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 150 in (381 cm) |
| Maximum Reach – With Arms Parallel | 53 in (135 cm) |
| Overall Length – Track | 75 in (190 cm) |
| Rack Back Angle – Maximum Height | 82 degrees |
| Reach at Max Lift and Dump | 2 ft (1 m) |
| Reach at Maximum Lift/Dump | 25 in (63 cm) |
| Turn Radius from Center – Bucket | 82 in (208 cm) |
| Turn Radius from Center – Coupler | 52 in (132 cm) |
| Turn Radius from Center – Rear | 54 in (137 cm) |
| Turning Radius from Center – inc bucket | 83 in (210 cm) |
| Turning Radius from Center – machine rear | 54 in (138 cm) |
| Vehicle Width | 66 in (168 cm) |
| Width Over Tracks | 6 ft (2 m) |
Engine
| Bore | 3 in (8 cm) |
| Displacement | 134 cu in (2,196 cu cm) |
| Engine Model | Cat C2.2 T |
| Gross Power – SAE J1995 | 62 hp (46 kw) |
| Net Power | 56 hp (42 kw) |
| Net Power – ISO 9249 EEC | 56 hp (42 kw) |
| Net Power – SAE 1349 | 56 hp (42 kw) |
| Stroke | 4 in (10 cm) |
Hydraulic System
| Hydraulic Flow | Standard |
| Hydraulic Power | 31 hp (23 kw) |
| Loader Hydraulic Flow | 16 gpm (61 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Pump Flow | 16 gpm (61 lpm) |
| Relief Valve Pressure | 3335 psi |
Loader
| Breakout Force | 4,060 lbs (1,842 kg) |
| Operating Load | 2,150 lbs (975 kg) |
| Operating Load Rating | 1,505 lbs (683 kg) |
| Operating Width | 66 in (168 cm) |
| Tipping Angle | 4299.1 degrees |
Operating Specifications
| Alternator Supplied Amperage | 85 amps |
| Breakout Force – Tilt Cylinder | 4,060 lbs (1,842 kg) |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Capacity | 3 gal (10 l) |
| Fuel Capacity | 17 gal (65 l) |
| Ground Contact Area | 1,770 cu in (29,005 cu cm) |
| Ground Pressure | 4 psi |
| Hydraulic System Fluid Capacity | 15 gal (55 l) |
| Max Speed – low range | 7 mph (11 kph) |
| Operating Voltage | 12 volts |
| Operating Weight | 6,997 lbs (3,174 kg) |
| Rated Operating Capacities – 35% Tipping Load | 1,505 lbs (683 kg) |
| Rated Operating Capacities – 50% Tipping Load | 2,150 lbs (975 kg) |
| Tipping Load | 4,300 lbs (1,950 kg) |
Power Train
| Travel Speed Forward | 7 mph (11 kph) |
| Travel Speed Reverse | 7 mph (11 kph) |
Service Refill Capacities
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 17 gal (64 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 9 gal (35 l) |
Undercarriage
| Ground Contact Area | 1,770 cu in (29,005 cu cm) |
| Ground Pressure | 4 psi |
| Length of Track on Ground | 5 ft (2 m) |
Weights
| Operating Weight | 6,997 lbs (3,174 kg) |
