Contents
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Cab
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Dimensions
| Bucket Pin Height – Carry Position | 9 in (22 cm) |
| Bucket Pin Height – Maximum Lift | 10 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 12 in (31 cm) |
| Clearance at Maximum Lift and Dump | 89 in (225 cm) |
| Departure Angle | 34.5 degrees |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – Track on Ground | 55 in (138 cm) |
| Length – With Bucket on Ground | 127 in (323 cm) |
| Length – Without Bucket | 99 in (252 cm) |
| Maximum Dump Angle | 48 degrees |
| Maximum Overall Height | 151 in (383 cm) |
| Maximum Reach – With Arms Parallel to Ground | 52 in (132 cm) |
| Overall Length – Track | 71 in (181 cm) |
| Rack Back Angle – Maximum Height | 87.5 degrees |
| Reach – Maximum Lift/Dump | 29 in (73 cm) |
| Turning Radius from Center – Bucket | 81 in (206 cm) |
| Turning Radius from Center – Coupler | 46 in (116 cm) |
| Turning Radius from Center – Machine Rear | 57 in (146 cm) |
| Vehicle Width (320 mm/12.6 in tracks) | 66 in (168 cm) |
| Vehicle Width (400 mm/15.7 in tracks) | 69 in (176 cm) |
Engine
| Bore | 3 in (8 cm) |
| Displacement | 134 cu in (2,201 cu cm) |
| Engine Model | Cat C2.2 CRDI |
| Gross Power | 60 hp (45 kw) |
| Gross Power – SAE J1995 | 67 hp (50 kw) |
| Net Power | 66 hp (49 kw) |
| Net Power – ISO 9249 | 67 hp (50 kw) |
| Net Power – SAE 1349 | 66 hp (49 kw) |
| Peak Torque – 1,500 rpm – SAE J1995 | 153 ft (47 m) |
| Stroke | 4 in (10 cm) |
Hydraulic System
| Hydraulic Flow – High Flow – Hydraulic Power (Calculated) | 51 hp (38 kw) |
| Hydraulic Flow – High Flow – Loader Hydraulic Flow | 26 gpm (98 lpm) |
| Hydraulic Flow – High Flow – Loader Hydraulic Pressure | 3336 psi |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 36 hp (26 kw) |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 18 gpm (68 lpm) |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3336 psi |
Loader
| Operating Load Rating | 2,300 lbs (1,043 kg) |
| Operating Width | 67 in (170 cm) |
Noise Level
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 103 dB(A) |
Operating Specifications
| Breakout Force – Tilt Cylinder | 3,963 lbs (1,798 kg) |
| Ground Contact Area – With 320 mm/12.6 in Track | 1,373 cu in (22,499 cu cm) |
| Ground Contact Area – With 400 mm/15.7 in Track | 1,716 cu in (28,120 cu cm) |
| Ground Pressure – With 320 mm/12.6 in Track | 5.6 psi |
| Ground Pressure – With 400 mm/15.7 in Track | 4.6 psi |
| Rated Operating Capacities – 35% Tipping Load | 1,610 lbs (730 kg) |
| Rated Operating Capacities – 50% Tipping Load | 2,300 lbs (1,043 kg) |
| Rated Operating Capacity with Optional Counterweight | 2,500 lbs (1,134 kg) |
| Tipping Load | 4,600 lbs (2,087 kg) |
Service Refill Capacities
| Cooling System | 3 gal (12 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 15 gal (57 l) |
| Hydraulic System | 12 gal (45 l) |
| Hydraulic Tank | 9 gal (34 l) |
