Contents
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Cab
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Dimensions
| Bucket Pin Height – Carry Position | 8 in (20 cm) |
| Bucket Pin Height – Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 15 in (39 cm) |
| Clearance at Maximum Lift and Dump | 96 in (245 cm) |
| Departure Angle | 30 degrees |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – Track on Ground | 71 in (181 cm) |
| Length – With Bucket on Ground | 155 in (394 cm) |
| Length – Without Bucket | 126 in (320 cm) |
| Maximum Dump Angle | 52 degrees |
| Maximum Overall Height | 161 in (408 cm) |
| Maximum Reach – With Arms Parallel to Ground | 50 in (126 cm) |
| Overall Length – Track | 90 in (229 cm) |
| Rack Back Angle – Maximum Height | 83 degrees |
| Reach – Maximum Lift/Dump | 31 in (77 cm) |
| Roll Back Angle | 27 degrees |
| Turning Radius from Center – Bucket (racked) | 92 in (233 cm) |
| Turning Radius from Center – Coupler | 59 in (150 cm) |
| Turning Radius from Center – Machine Rear | 73 in (186 cm) |
| Vehicle Width | 78 in (198 cm) |
Engine
| Bore | 4 in (10 cm) |
| Displacement | 232 cu in (3,802 cu cm) |
| Engine Model | Cat C3.8 DIT (turbo) |
| Gross Power | 95 hp (71 kw) |
| Gross Power – SAE J1995 | 98 hp (73 kw) |
| Net Power | 95 hp (71 kw) |
| Net Power – ISO 9249 | 95 hp (71 kw) |
| Net Power – SAE 1349 | 95 hp (71 kw) |
| Peak Torque – 1,500 rpm – SAE J1995 | 246 ft (75 m) |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Flow – High Flow XPS – Hydraulic Power (Calculated) | 76 hp (57 kw) |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Flow | 32 gpm (121 lpm) |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Pressure | 4061 psi |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 44 hp (33 kw) |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 23 gpm (87 lpm) |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3335 psi |
Loader
| Operating Load Rating | 4,700 lbs (2,132 kg) |
| Operating Width | 76 in (193 cm) |
Noise Level
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 104 dB(A) |
Operating Specifications
| Breakout Force – Lift Cylinder | 6,072 lbs (2,754 kg) |
| Breakout Force – Tilt Cylinder | 7,468 lbs (3,387 kg) |
| Ground Contact Area | 2,561 cu in (41,967 cu cm) |
| Ground Pressure | 4.2 psi |
| Rated Operating Capacities – 35% Tipping Load | 3,290 lbs (1,492 kg) |
| Rated Operating Capacities – 50% Tipping Load | 4,700 lbs (2,132 kg) |
| Rated Operating Capacity with Optional Counterweight | 4,960 lbs (2,250 kg) |
| Tipping Load | 9,400 lbs (4,264 kg) |
Power Train
| Travel Speed – Forward or Reverse – One Speed | 6 mph (9 kph) |
| Travel Speed – Forward or Reverse – Two Speed | 9 mph (15 kph) |
Service Refill Capacities
| Cooling System | 4 gal (16 l) |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (19 l) |
| Engine Crankcase | 4 gal (13 l) |
| Fuel Tank | 32 gal (122 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 10 gal (39 l) |
