Contents
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
Cab
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Dimensions
| Bucket Pin Height – Carry Position | 7 in (18 cm) |
| Bucket Pin Height – Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 19 in (49 cm) |
| Clearance at Maximum Lift and Dump | 95 in (240 cm) |
| Departure Angle | 33 degrees |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – Track on Ground | 70 in (177 cm) |
| Length – With Bucket on Ground | 155 in (393 cm) |
| Length – Without Bucket | 126 in (319 cm) |
| Maximum Dump Angle | 54 degrees |
| Maximum Overall Height | 159 in (403 cm) |
| Maximum Reach – With Arms Parallel to Ground | 52 in (132 cm) |
| Overall Length – Track | 89 in (227 cm) |
| Rack Back Angle – Maximum Height | 81 degrees |
| Reach – Maximum Lift/Dump | 34 in (85 cm) |
| Roll Back Angle | 25 degrees |
| Turning Radius from Center – Bucket (racked) | 91 in (231 cm) |
| Turning Radius from Center – Coupler | 58 in (148 cm) |
| Turning Radius from Center – Machine Rear | 74 in (188 cm) |
| Vehicle Width (400 mm/15.7 in tracks) | 76 in (193 cm) |
| Vehicle Width (450 mm/17.7 in tracks) | 78 in (198 cm) |
Engine
| Bore | 4 in (10 cm) |
| Displacement | 232 cu in (3,802 cu cm) |
| Engine Model | Cat C3.8 DIT (turbo) |
| Gross Power | 95 hp (71 kw) |
| Gross Power | 106 hp (79 kw) |
| Gross Power – SAE J1995 | 98 hp (73 kw) |
| Net Power | 95 hp (71 kw) |
| Net Power – ISO 9249 | 95 hp (71 kw) |
| Net Power – SAE 1349 | 95 hp (71 kw) |
| Peak Torque – 1,500 rpm – SAE J1995 | 246 ft (75 m) |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Flow – High Flow XPS – Hydraulic Power (Calculated) | 76 hp (57 kw) |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Flow | 32 gpm (121 lpm) |
| Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Pressure | 4061 psi |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 44 hp (33 kw) |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 23 gpm (87 lpm) |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3335 psi |
Loader
| Operating Load Rating | 4,725 lbs (2,143 kg) |
| Operating Load Rating | 4,600 lbs (2,087 kg) |
| Operating Width | 76 in (193 cm) |
| Operating Width | 76 in (193 cm) |
Noise Level
| Inside Cab* | 83 dB(A) |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 104 dB(A) |
Operating Specifications
| Breakout Force – Lift Cylinder | 6,162 lbs (2,795 kg) |
| Breakout Force – Tilt Cylinder | 7,270 lbs (3,298 kg) |
| Ground Contact Area – With 400 mm/15.7 in Track | 2,184 cu in (35,789 cu cm) |
| Ground Contact Area – With 450 mm/17.7 in Track | 2,463 cu in (40,361 cu cm) |
| Ground Pressure – With 400 mm/15.7 in Track | 5.2 psi |
| Ground Pressure – With 450 mm/17.7 in Track | 4.6 psi |
| Rated Operating Capacities – 35% Tipping Load | 3,200 lbs (1,451 kg) |
| Rated Operating Capacities – 50% Tipping Load | 4,600 lbs (2,087 kg) |
| Rated Operating Capacity with Optional Counterweight | 4,860 lbs (2,204 kg) |
| Tipping Load | 9,200 lbs (4,173 kg) |
Power Train
| Travel Speed – Forward or Reverse – One Speed | 5 mph (8 kph) |
| Travel Speed – Forward or Reverse – Two Speed | 8 mph (14 kph) |
Service Refill Capacities
| Cooling System | 4 gal (16 l) |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (19 l) |
| Engine Crankcase | 4 gal (13 l) |
| Fuel Tank | 32 gal (122 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 10 gal (39 l) |
