Contents
Dimensions
| Ground Clearance | 2 ft (1 m) |
| Height – Top of Cab | 11 ft (3 m) |
| Length of Track on Ground | 10 ft (3 m) |
| Length w/ Blade | 18 ft (5 m) |
| Length w/o Blade | 14 ft (4 m) |
| Width Over Tracks | 10 ft (3 m) |
Engine
| Aspiration | Turbocharged |
| Displacement | 403 cu in (6,601 cu cm) |
| Engine Model | 3116 T |
| Flywheel Power | 140 hp (104 kw) |
| Gross Power | 153 hp (114 kw) |
| Maximum Flywheel Power | 153 hp (114 kw) |
| Net Power | 140 hp (104 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2200 rpm |
Hydraulic System
| Pump Flow Capacity | 32 gpm (119 lpm) |
| Pump type | Piston |
| Relief Valve Pressure | 3600 psi |
Operating Specifications
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 13 gal (48 l) |
| Engine Oil Capacity | 7 gal (26 l) |
| Final Drives Fluid Capacity | 2 gal (7 l) |
| Fuel Capacity | 82 gal (311 l) |
| Hydraulic Fluid Capacity | 8 gal (30 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 36,400 lbs (16,511 kg) |
Ripper
| Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole | 20 in (51 cm) |
| Maximum Penetration | 15 in (37 cm) |
| Number of Pockets | 3 |
| Overall Beam Width | 87 in (220 cm) |
| Ripper Type | Parallelogram |
Service Refill Capacities
| Cooling System | 13 gal (48 l) |
| Engine Crankcase | 7 gal (26 l) |
| Final Drive – Each | 2 gal (7 l) |
| Fuel Tank | 82 gal (311 l) |
| Hydraulic Tank | 8 gal (30 l) |
| Power Train | 32 gal (122 l) |
Standard Blade
| Capacity | 4 cu yd (3 cu m) |
| Height | 40 in (103 cm) |
| Width | 13 ft (4 m) |
Transmission
| 1 Forward | 2 mph (4 kph) |
| 1 Reverse | 3 mph (4 kph) |
| 2 Forward | 4 mph (6 kph) |
| 2 Reverse | 5 mph (8 kph) |
| 3 Forward | 6 mph (10 kph) |
| 3 Reverse | 8 mph (13 kph) |
| Max Speed – Forward | 6 mph (10 kph) |
| Max Speed – Reverse | 8 mph (13 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Transmission Type | Power Shift |
Undercarriage
| Ground Clearance | 0 ft (0 m) |
| Ground Contact Area | 6,820 cu in (111,760 cu cm) |
| Ground Pressure | 4.6 psi |
| Number of Shoes per Side | 46 |
| Number of Track Rollers per Side | 8 |
| Standard Shoe Size | 28 in (71 cm) |
| Track Gauge | 7 ft (2 m) |
Winch
| Drum Diameter | 10 in (25 cm) |
| Drum Width | 13 in (33 cm) |
| Flange Diameter | 20 in (51 cm) |
| Increased Tractor Length – STD | 15 in (38 cm) |
| Oil Capacity | 20 gal (74 l) |
| Weight | 2,813 lbs (1,276 kg) |
| Winch and Bracket Length | 44 in (112 cm) |
| Winch Case – Width | 38 in (98 cm) |
