Contents
Dimensions
| Drawbar Height (Center of Clevis) from Ground Face of Shoes | 23 in (58 cm) |
| Ground Clearance | 1 ft (0 m) |
| Length – Track on Ground | 105 in (266 cm) |
| Track Gauge | 6 ft (2 m) |
Engine
| Bore | 4 in (11 cm) |
| Displacement | 537 cu in (8,800 cu cm) |
| Engine Model | Cat C9 ACERT |
| Flywheel Power | 185 hp (138 kw) |
| Gross Power | 213 hp (159 kw) |
| Net Power – Caterpillar | 185 hp (138 kw) |
| Net Power – EU 80/1269 | 185 hp (138 kw) |
| Net Power – ISO 9249 | 185 hp (138 kw) |
| Net Power – SAE J1349 | 183 hp (136 kw) |
| Stroke | 6 in (15 cm) |
Hydraulic Controls – Pump
| Ripper Cylinder Flow | 42 gpm (160 lpm) |
| Tilt Cylinder Flow | 21 gpm (80 lpm) |
Ripper
| Beam Cross Section | 216 x 254 mm 8.5 x 10 in |
| Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole | 20 in (51 cm) |
| Maximum Penetration | 20 in (50 cm) |
| Maximum Penetration Force | 14,557 lbs (6,603 kg) |
| Number of Pockets | 3 |
| Overall Beam Width | 87 in (221 cm) |
| Pry-Out Force | 20,137 lbs (9,134 kg) |
| Ripper Type | Fixed Parallelogram |
| Weight – Each Additional Shank | 163 lbs (74 kg) |
| Weight – With One Shank | 3,606 lbs (1,636 kg) |
Service Refill Capacities
| Cooling System | 19 gal (70 l) |
| Engine Crankcase | 7 gal (28 l) |
| Final Drive – Each | 4 gal (14 l) |
| Fuel Tank | 112 gal (424 l) |
| Hydraulic Tank | 14 gal (51 l) |
| Pivot Shaft Compartment | 1 gal (5 l) |
| Power Train | 39 gal (146 l) |
| Roller Frames – Each | 7 gal (25 l) |
Standards
| Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99 |
Transmission
| 1 Forward | 2 mph (4 kph) |
| 1 Reverse | 3 mph (5 kph) |
| 2 Forward | 4 mph (7 kph) |
| 2 Reverse | 5 mph (8 kph) |
| 3 Forward | 7 mph (11 kph) |
| 3 Reverse | 9 mph (15 kph) |
Undercarriage
| Ground Clearance | 1 ft (0 m) |
| Ground Pressure | 6.8 psi |
| Grouser Height | 3 in (7 cm) |
| Track Gauge | 7 ft (2 m) |
Winch
| Drum Capacity – 22 mm (0.88 in) | 290 ft (88 m) |
| Drum Capacity – 25 mm (1.0 in) | 220 ft (67 m) |
| Drum Capacity – 29 mm (1.13 in) | 220 ft (67 m) |
| Drum Diameter | 10 in (25 cm) |
| Drum Width | 13 in (33 cm) |
| Ferrule Size (O.D. Length) | 54 x 67 mm 2.10 x 2.63 in |
| Flange Diameter | 20 in (50 cm) |
| Increased Tractor Length – LGP | 16 in (40 cm) |
| Increased Tractor Length – STD | 20 in (52 cm) |
| Increased Tractor Length – XL/XW | 20 in (52 cm) |
| Oil Capacity | 18 gal (67 l) |
| Weight | 2,600 lbs (1,179 kg) |
| Winch and Bracket Length | 48 in (121 cm) |
| Winch Case – Width | 38 in (98 cm) |
