Contents
Dimensions
| Drawbar Height (Center of Clevis) from Ground Face of Shoes | 23 in (58 cm) |
| Length – Track on Ground | 113 in (287 cm) |
Engine
| Bore | 4 in (11 cm) |
| Displacement | 537 cu in (8,800 cu cm) |
| Engine Model | Cat C9 ACERT |
| Flywheel Power | 200 hp (149 kw) |
| Gross Power | 213 hp (159 kw) |
| Make | Cat |
| Model | C9 ACERT |
| Net Power | 185 hp (138 kw) |
| Net Power – Caterpillar | 185 hp (138 kw) |
| Net Power – EU 80/1269 | 185 hp (138 kw) |
| Net Power – ISO 9249 | 185 hp (138 kw) |
| Net Power – SAE J1349 | 183 hp (136 kw) |
| Stroke | 6 in (15 cm) |
Hydraulic Controls – Pump
| Ripper Cylinder Flow | 50 gpm (189 lpm) |
| Tilt Cylinder Flow | 21 gpm (80 lpm) |
Operating Specifications
| Operating Weight | 40,550 lbs (18,393 kg) |
Ripper
| Beam Cross Section | 216 254 mm 8.5 10 in |
| Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole | 20 in (51 cm) |
| Maximum Penetration | 20 in (50 cm) |
| Maximum Penetration Force | 14,557 lbs (6,603 kg) |
| Number of Pockets | 3 |
| Overall Beam Width | 87 in (221 cm) |
| Pry-Out Force | 20,137 lbs (9,134 kg) |
| Ripper Type | Fixed Parallelogram |
| Weight – Each Additional Shank | 163 lbs (74 kg) |
| Weight – With One Shank | 3,606 lbs (1,636 kg) |
Service Refill Capacities
| Cooling System | 20 gal (77 l) |
| Engine Crankcase | 7 gal (28 l) |
| Final Drive – Each | 4 gal (14 l) |
| Fuel Tank | 112 gal (424 l) |
| Hydraulic Tank | 14 gal (51 l) |
| Pivot Shaft Compartment | 1 gal (5 l) |
| Power Train | 39 gal (146 l) |
| Roller Frames – Each | 7 gal (25 l) |
Standards
| Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99 |
STD Option
| 24 | 24 volts |
| Capacity | 5 cu yd (4 cu m) |
| Cooling System Fluid Capacity | 19 gal (70 l) |
| Displacement | 537 cu in (8,800 cu cm) |
| Engine Model | C9 ACERT |
| Engine Oil Capacity | 7 gal (28 l) |
| Final Drives Fluid Capacity | 4 gal (14 l) |
| Fuel Capacity | 112 gal (424 l) |
| Gross Power | 213 hp (159 kw) |
| Ground Clearance | 1 ft (0 m) |
| Ground Contact Area | 4,620 cu in (75,708 cu cm) |
| Ground Pressure | 8.8 psi |
| Height | 45 in (114 cm) |
| Height – Top of Cab | 11 ft (3 m) |
| Hydraulic Fluid Capacity | 14 gal (51 l) |
| Length of Track on Ground | 9 ft (3 m) |
| Length w/o Blade | 13 ft (4 m) |
| Max Speed – Forward | 7 mph (12 kph) |
| Max Speed – Reverse | 9 mph (15 kph) |
| Net Power | 185 hp (138 kw) |
| Number of Cylinders | 6 |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Number of Shoes per Side | 39 |
| Number of Track Rollers per Side | 6 |
| Operating Weight | 41,298 lbs (18,732 kg) |
| Power Measured @ | 1850 rpm |
| Pump Flow Capacity | 50 gpm (189 lpm) |
| Relief Valve Pressure | 2799 psi |
| Standard Shoe Size | 22 in (56 cm) |
| Track Pitch | 8 in (20 cm) |
| Transmission Type | Powershift |
| Width | 14 ft (4 m) |
| Width Over Tracks | 8 ft (2 m) |
Transmission
| 2 Forward | 3 mph (5 kph) |
| 2 Reverse | 4 mph (7 kph) |
| 3 Forward | 5 mph (9 kph) |
| 3 Reverse | 7 mph (11 kph) |
| 3.5 Reverse | 9 mph (15 kph) |
Undercarriage
| Ground Pressure | 9.4 psi |
| Grouser Height | 3 in (7 cm) |
Winch
| Drum Capacity – 22 mm (0.88 in) | 290 ft (88 m) |
| Drum Capacity – 25 mm (1.0 in) | 220 ft (67 m) |
| Drum Capacity – 29 mm (1.13 in) | 220 ft (67 m) |
| Drum Diameter | 10 in (25 cm) |
| Drum Width | 13 in (33 cm) |
| Ferrule Size (O.D. Length) | 54 67 mm 2.10 2.63 in |
| Flange Diameter | 20 in (50 cm) |
| Increased Tractor Length – LGP | 16 in (40 cm) |
| Increased Tractor Length – STD | 20 in (52 cm) |
| Increased Tractor Length – XL/XW | 20 in (52 cm) |
| Oil Capacity | 18 gal (67 l) |
| Weight | 2,600 lbs (1,179 kg) |
| Winch and Bracket Length | 48 in (121 cm) |
| Winch Case – Width | 38 in (98 cm) |
