Contents
BODY CAPACITIES
| Heaped (SAE 2:1) | 33 cu yd (25 cu m) |
| Struck | 24 cu yd (19 cu m) |
| Tailgate Heaped SAE 2:1 | 35 cu yd (27 cu m) |
| Tailgate Struck | 26 cu yd (19 cu m) |
BODY HOIST
| Lower (automatic) | 10 s |
| Lower (manual) | 10 s |
| Raise (automatic) | 13 s |
| Raise (manual) | 12 s |
BODY PLATE
| Base | 1 in (1 cm) |
| Chute | 1 in (1 cm) |
| Front | 0 in (1 cm) |
| Side | 0 in (1 cm) |
| Type | High Strength Brinell HB450 Wear Resistant Steel |
ENGINE
| Bore | 6 in (14 cm) |
| Displacement | 1,106 cu in (18,124 cu cm) |
| Emissions | Meets Tier 4 Final and Stage V standards |
| Engine Model | Cat C18 |
| Engine Model – Regulations | Cat® C18 (U.S. EPA Tier 4 Final, EU Stage V, etc.) |
| Gross Power – SAE J1995 | 511 hp (381 kw) |
| Net Power – ISO 14396 | 504 hp (376 kw) |
| Net Power – SAE J1349 | 496 hp (370 kw) |
| Peak Engine Torque Gross (SAE J1995) | 1,931 lbs ft (2,618 nm) |
| Peak Engine Torque Net (SAE J1349) | 1,887 lbs ft (2,558 nm) |
| Peak Engine Torque Speed | 1200 r/min |
| Stroke | 7 in (18 cm) |
NOTES ON ENGINE
| Note (1) | Power ratings at 1,700 rpm |
| Note (2) | Power at the flywheel with minimum equipment |
| Note (3) | Net power with fan at max is 348 kW (467 hp) |
| Note (4) | DEF must meet ISO 22241-1 standard |
OPERATING WEIGHTS
| Center Axle – Empty | 15,309 lbs (6,944 kg) |
| Center Axle – Loaded | 54,000 lbs (24,494 kg) |
| Center Axle – Rated Load | 38,691 lbs (17,550 kg) |
| Front Axle – Empty | 43,515 lbs (19,738 kg) |
| Front Axle – Loaded | 56,522 lbs (25,638 kg) |
| Front Axle – Rated Load | 13,007 lbs (5,900 kg) |
| Rear Axle – Empty | 14,731 lbs (6,682 kg) |
| Rear Axle – Loaded | 53,422 lbs (24,232 kg) |
| Rear Axle – Rated Load | 38,691 lbs (17,550 kg) |
| Total – Empty | 73,553 lbs (33,363 kg) |
| Total – Loaded | 163,942 lbs (74,363 kg) |
| Total – Rated Load | 90,390 lbs (41,000 kg) |
SERVICE REFILL CAPACITIES
| Axles – Each | 16 gal (60 l) |
| Brake Cooling Tank | 18 gal (67 l) |
| Cooling System | 24 gal (90 l) |
| DEF Tank | 5 gal (20 l) |
| Engine Crankcase | 14 gal (52 l) |
| Final Drive – Each | 1 gal (5 l) |
| Fuel Tank | 145 gal (550 l) |
| Steering/Hoist Hydraulic System | 37 gal (140 l) |
| Transmission – OTG | 20 gal (75 l) |
SOUND LEVELS
| Interior Cab | 72 dB(A) |
| Note (1) | Operator sound exposure Leq is 76 dB(A) |
| Note (2) | Hearing protection may be needed in certain settings |
STANDARDS
| Brakes | ISO 3450 – 2011 |
| Cab – FOPS | ISO 3449 Level II – 2005 |
| Cab – ROPS | ISO 3471 – 2008 |
| Steering | ISO 5010 – 2007 |
STEERING
| Lock to Lock | 4.8 seconds @ 60 rpm |
TRANSMISSION
| Forward – 1 | 4 mph (6 kph) |
| Forward – 2 | 5 mph (8 kph) |
| Forward – 3 | 7 mph (11 kph) |
| Forward – 4 | 9 mph (14 kph) |
| Forward – 5 | 12 mph (19 kph) |
| Forward – 6 | 14 mph (23 kph) |
| Forward – 7 | 20 mph (32 kph) |
| Forward – 8 | 24 mph (38 kph) |
| Forward – 9 | 34 mph (55 kph) |
| Reverse – 1 | 4 mph (6 kph) |
| Reverse – 2 | 9 mph (15 kph) |
TURNING CIRCLE
| Note | Dimensions are for machines equipped with 29.5R25 tires. |
| Turning Dimensions – Aisle Width | 233 in (592 cm) |
| Turning Dimensions – Clearance Radius | 359 in (912 cm) |
| Turning Dimensions – Inside Radius | 174 in (442 cm) |
| Turning Dimensions – SAE Turning Radius | 340 in (864 cm) |
| Turning Dimensions – Steer Angle – Left/Right | 45° |
WEIGHTS
| Rated Payload | 45 t (45,200 kg) |
