Contents
Approximate Weights – Dual Slope
| Gross Weight – Empty | 134,000 lbs (60,781 kg) |
Approximate Weights – Flat Floor
| Body | 28,451 lbs (12,905 kg) |
| Chassis | 35 lbs (16 kg) |
Articulating/Rigid
| Articulating/Rigid | Rigid |
Body Hoists
| Body Lower Time – Float | 12.5 seconds |
| Body Power Down – High Idle | 31 degrees |
| Body Raise Time – High Idle | 9.5 seconds |
| Pump Flow – High Idle | 148 gpm (560 lpm) |
| Relief Valve Setting – Raise | 2500 psi |
Brakes
| Brake Surface – Rear | 9,497 cu in (155,628 cu cm) |
| Standards | 3.64:1 |
Dimensions
| Centerline Front Tire Width | 11 ft (3 m) |
| Dump Ground Clearance | 2 ft (1 m) |
| Dump Height | 31 ft (9 m) |
| Front Canopy Height | 15 ft (4 m) |
| Ground Clearance | 3 ft (1 m) |
| Inside Body Length | 21 ft (6 m) |
| Loading Height – Empty | 13 ft (4 m) |
| Operating Width | 18 ft (5 m) |
| Overall Height | 15 ft (4 m) |
| Overall Height – Body Raised | 31 ft (9 m) |
| Overall Length | 34 ft (10 m) |
| Overall Width | 18 ft (5 m) |
| Wheel Base | 14 ft (4 m) |
| Wheelbase | 14 ft (4 m) |
DRIVE SYSTEM
| Drive Config | 4×2 |
Dump
| Load Capacity – heaped | 46 cu yd (35 cu m) |
| Load Capacity – Struck | 34 cu yd (26 cu m) |
| Lower Time | 12.5 seconds |
| Raise Time | 9.5 seconds |
Engine
| Aspiration | Turbocharged |
| Bore | 5 in (14 cm) |
| Displacement | 1,649 cu in (27,022 cu cm) |
| Engine Model | Cat C27 ACERT |
| Flywheel Power | 703 hp (524 kw) |
| Gross Power | 740 hp (552 kw) |
| Gross Power – SAE J1995 | 740 hp (552 kw) |
| Make | Cat |
| Max Torque | 2,507 lbs ft (3,399 nm) |
| Model | C27 ACERT |
| Net Power | 703 hp (524 kw) |
| Net Power – 80/1269/EEC | 703 hp (524 kw) |
| Net Power – Cat | 703 hp (524 kw) |
| Net Power – ISO 9249 | 703 hp (524 kw) |
| Net Power – SAE J1349 | 703 hp (524 kw) |
| Number of Cylinders | 12 |
| Peak Torque | 2,507 lbs ft (3,399 nm) |
| Power Measured @ | 1800 rpm |
| Stroke | 6 in (15 cm) |
| Torque Measured @ | Turbocharged rpm |
Final Drives
| Planetary Ratio | 4.80:1 |
| Total Reduction Ratio | 17.49:1 |
Operating Specifications
| Alternator Supplied Amperage | Gear |
| Body Capacity – SAE 2:1 | 46 cu yd (35 cu m) |
| Brake/Hoist System Fluid Capacity | 81 gal (307 l) |
| Cooling System Fluid Capacity | 46 gal (174 l) |
| Diff and Final Drive Fluid Capacity | 41 gal (155 l) |
| Engine Oil Capacity | 19 gal (72 l) |
| Fuel Capacity | 185 gal (700 l) |
| Lower Time | 12.5 seconds |
| Maximum Capacity | 107,080 lbs (48,571 kg) |
| Nominal Payload Capacity | 41 lbs (19 kg) |
| Nominal Payload Class (100%) | 122,000 lbs (55,338 kg) |
| Not to Exceed Payload (120%)* | 146,000 lbs (66,225 kg) |
| Raise Time | 9.5 seconds |
| Steer Angle | 77.1 degrees |
| Steering System Fluid Capacity | 16 gal (61 l) |
| Tire Size | 24.00R35(E4) |
| Top Speed – Loaded | 42 mph (67 kph) |
ROPS
| ROPS Standards | .ANSI/SAE J1166 MAY90 |
Service Refill Capacities
| Brake / Hoist / Fan Hydraulic Tank | 35 gal (132 l) |
| Brake Hoist System – Includes Tank | 81 gal (307 l) |
| Brake/Hoist Hydraulic Tank | 120,000 gal (454,200 l) |
| Cooling System | 46 gal (174 l) |
| Crankcase | 25 gal (95 l) |
| Fuel Tank | 185 gal (700 l) |
| Steering System – Including Tank | 16 gal (61 l) |
| Steering Tank | 9 gal (34 l) |
| Torque Converter – Transmission System – Including Sump | 19 gal (72 l) |
Sound
| Sound Standards | ANSI/SAE J1166 MAY90 |
Steering System
| Steering Standards | SAE J1511 FEB94 ISO 5010:1992 |
Suspension
| Effective Cylinder Stroke – Rear | 6 in (15 cm) |
Tires
| Standard Tire | 24.00R35 (E4) |
| Standard Tires | 216 |
Transmission
| Forward – 1 | 7 mph (11 kph) |
| Forward – 2 | 9 mph (15 kph) |
| Forward – 3 | 13 mph (20 kph) |
| Forward – 4 | 17 mph (27 kph) |
| Forward – 5 | 23 mph (37 kph) |
| Forward – 6 | 31 mph (50 kph) |
| Forward – 7 | 42 mph (67 kph) |
| Max Speed | 42 mph (67 kph) |
| Number of Gears – Forward | 7 |
| Number of Gears – Reverse | 1 |
| Reverse | 9 mph (14 kph) |
Weights
| Empty Weight | 98,312 lbs (44,594 kg) |
| Front Axle – Empty | 51% |
| Front Axle – Loaded | 35% |
| Loaded Weight | 222,000 lbs (100,698 kg) |
| Operating Weight | 222,000 lbs (100,698 kg) |
| Operating Weight – Loaded | SAE J1511 FEB94 ISO 5010:1992 lbs |
| Rear Axle – Empty | 49% |
| Rear Axle – Loaded | 65% |
| Target Gross Machine Operating Weight | 222,001 lbs (100,698 kg) |
| Weight Distribution Front – empty | 51% |
| Weight Distribution Front – loaded | 35% |
| Weight Distribution Rear – empty | 49% |
| Weight Distribution Rear – loaded | 65% |
