Contents
Approximate Weights – Dual Slope
| Body | 36,200 lbs (16,420 kg) |
| Chassis | 107,756 lbs (48,877 kg) |
| Gross Weight – Empty | 142,039 lbs (64,428 kg) |
Articulating/Rigid
| Articulating/Rigid | Rigid |
Body Hoists
| Body Raise Time – High Idle | 15 seconds |
| Pump Flow – High Idle | 130 gpm (492 lpm) |
| Relief Valve Setting – Raise | 2750 psi |
Brakes
| Brake Standards | 17.2 |
| Standards | 2.74:1 |
Capacity – Dual Slope – 100% Fill Factor
| Struck | 55 cu yd (42 cu m) |
Dimensions
| Centerline Front Tire Width | 13 ft (4 m) |
| Dump Ground Clearance | 3 ft (1 m) |
| Dump Height | 34 ft (10 m) |
| Front Canopy Height | 17 ft (5 m) |
| Ground Clearance | 3 ft (1 m) |
| Inside Body Length | 22 ft (7 m) |
| Loading Height – Empty | 14 ft (4 m) |
| Operating Width | 21 ft (6 m) |
| Outside Body Width | 18 ft (6 m) |
| Overall Height | 17 ft (5 m) |
| Overall Height – Body Raised | 34 ft (10 m) |
| Overall Length | 35 ft (11 m) |
| Overall Width | 21 ft (6 m) |
| Wheel Base | 15 ft (5 m) |
| Wheelbase | 15 ft (5 m) |
DRIVE SYSTEM
| Drive Config | 4×2 |
Dump
| Dump Angle | 49.4 degrees |
| Load Capacity – heaped | 79 cu yd (60 cu m) |
| Load Capacity – Struck | 55 cu yd (42 cu m) |
| Lower Time | 13 seconds |
| Raise Time | 15 seconds |
Engine
| Aspiration | Turbocharged |
| Bore | 6 in (14 cm) |
| Displacement | 1,959 cu in (32,102 cu cm) |
| Engine Model | Cat C32 ACERT |
| Gross Power | 1,016 hp (758 kw) |
| Gross Power – SAE J1995 | 1,016 hp (758 kw) |
| Make | Cat |
| Max Torque | 3,478 lbs ft (4,715 nm) |
| Model | C32 ACERT |
| Net Power | 939 hp (700 kw) |
| Net Power – 80/1269/EEC | 939 hp (700 kw) |
| Net Power – Cat | 939 hp (700 kw) |
| Net Power – ISO 9249 | 939 hp (700 kw) |
| Net Power – SAE J1349 | 939 hp (700 kw) |
| Number of Cylinders | 12 |
| Peak Torque | 2,478 lbs ft (3,360 nm) |
| Rated Engine Speed | 50 rpm |
| Stroke | 6 in (16 cm) |
| Torque Measured @ | Turbocharged rpm |
| Torque Rise | 12 |
Final Drives
| Planetary Ratio | 7.00:1 |
Operating Specifications
| Alternator Supplied Amperage | Seven-speed planetary power shift |
| Brake/Hoist System Fluid Capacity | 133 gal (503 l) |
| Cooling System Fluid Capacity | 61 gal (231 l) |
| Diff and Final Drive Fluid Capacity | 70 gal (265 l) |
| Engine Oil Capacity | 133 gal (503 l) |
| Fuel Capacity | 300 gal (1,136 l) |
| Hydraulic System Fluid Capacity | 50 gal (189 l) |
| Steering System Fluid Capacity | 15 gal (57 l) |
| Tire Size | 27.00R49(E4) |
| Top Speed – Loaded | 40 mph (65 kph) |
| Turning Circle – Clearance Diameter | 65 ft (20 m) |
ROPS
| ROPS/FOPS Standards | 36200 |
Service Refill Capacities
| Brake / Hoist / Fan Hydraulic Tank | 79 gal (298 l) |
| Brake Hoist System – Includes Tank | 133 gal (503 l) |
| Cooling System | 61 gal (231 l) |
| Fuel Tank – Standard | 300 gal (1,136 l) |
| Steering System – Including Tank | 15 gal (57 l) |
| Steering Tank | 8 gal (30 l) |
| Torque Converter – Transmission Sump | 107,756 gal (407,856 l) |
| Torque Converter/Transmission System – Including Sump | 65 gal (246 l) |
Sound
| Sound Standards | ANSI/J919 APR95 SAE J88 APR95 |
Suspension
| Effective Cylinder Stroke – Rear | 7 in (17 cm) |
| Rear axle – Oscillation | 12.6 degrees |
Tires
| Standard Tires | 27.00R49 (E4) |
Transmission
| Forward – 1 | 7 mph (10 kph) |
| Forward – 2 | 9 mph (14 kph) |
| Forward – 3 | 12 mph (19 kph) |
| Forward – 4 | 16 mph (26 kph) |
| Forward – 5 | 22 mph (35 kph) |
| Forward – 6 | 30 mph (48 kph) |
| Forward – 7 | 40 mph (65 kph) |
| Max Speed | 40 mph (65 kph) |
| Number of Gears – Forward | 7 |
| Number of Gears – Reverse | 1 |
| Reverse | 8 mph (12 kph) |
Weights
| Body Weight | 107,756 lbs (48,877 kg) |
| Body Weight Range | 36200 |
| Empty Weight | 163,090 lbs (73,976 kg) |
| Loaded Weight | 360,000 lbs (163,293 kg) |
| Weight Distribution Front – empty | 45% |
| Weight Distribution Front – loaded | 33% |
| Weight Distribution Rear – empty | 55% |
| Weight Distribution Rear – loaded | 67% |
