Contents
Approximate Weights – Dual Slope
| Gross Weight – Empty | 310,525 lbs (140,852 kg) |
Approximate Weights – Flat Floor
| Body | 66,200 lbs (30,028 kg) |
| Chassis | 225,400 lbs (102,240 kg) |
Articulating/Rigid
| Articulating/Rigid | Rigid |
Body Hoists
| Body Lower Time – Float | 17.3 seconds |
| Body Raise Time – High Idle | 18.9 seconds |
| Pump Flow – High Idle | 193 gpm (731 lpm) |
| Relief Valve Setting – Lower | 96 psi |
| Relief Valve Setting – Raise | 2500 psi |
Capacity – Dual Slope – 100% Fill Factor
| Heaped 2:1 (SAE) | 102 cu yd (78 cu m) |
| Struck | 96 cu yd (73 cu m) |
Capacity – Flat Floor – 100% Fill Factor
| Struck | 102 cu yd (78 cu m) |
Dimensions
| Dump Ground Clearance | 4 ft (1 m) |
| Dump Height | 39 ft (12 m) |
| Ground Clearance | 4 ft (1 m) |
| Overall Height | 20 ft (6 m) |
| Overall Length | 40 ft (12 m) |
| Overall Width | 25 ft (8 m) |
| Wheelbase | 19 ft (6 m) |
DRIVE SYSTEM
| Drive Config | 4×2 |
Dump
| Dump Angle | 49.5 degrees |
| Load Capacity – heaped | 137 cu yd (105 cu m) |
| Load Capacity – Struck | 102 cu yd (78 cu m) |
| Lower Time | 17.3 seconds |
| Raise Time | 18.9 seconds |
Engine
| Bore | 7 in (17 cm) |
| Displacement | 4,211 cu in (69,006 cu cm) |
| Engine Model | Cat 3516B EUI |
| Gross Power | 1,900 hp (1,417 kw) |
| Gross Power – SAE J1995 | 1,900 hp (1,417 kw) |
| Make | Cat |
| Model | 3516B |
| Net Power | 1,770 hp (1,320 kw) |
| Net Power – 80/1269/EEC | 1,791 hp (1,336 kw) |
| Net Power – ISO 9249 | 1,791 hp (1,336 kw) |
| Net Power – SAE J1349 | 1,771 hp (1,321 kw) |
| Number of Cylinders | 16 |
| Power Measured @ | 1750 rpm |
| Rated Engine Speed | 140 rpm |
| Stroke | 8 in (19 cm) |
| Torque Measured @ | Turbocharged rpm |
| Torque Rise | 15.6 |
Final Drives
| Planetary Ratio | 10.83:1 |
Operating Specifications
| Body Capacity – SAE 2:1 | 137 cu yd (105 cu m) |
| Brake/Hoist System Fluid Capacity | 240 gal (908 l) |
| Cooling System Fluid Capacity | 175 gal (662 l) |
| Diff and Final Drive Fluid Capacity | 154 gal (583 l) |
| Engine Oil Capacity | 20 gal (76 l) |
| Fuel Capacity | 851 gal (3,221 l) |
| Hydraulic System Fluid Capacity | 140 gal (530 l) |
| Operating Voltage | 24 volts |
| Steering System Fluid Capacity | 50 gal (189 l) |
| Tire Size | 37.00-R57(E4) |
| Top Speed – Loaded | 33 mph (53 kph) |
| Turning Diameter – Front | 99 ft (30 m) |
ROPS
| ROPS/FOPS Standards | 59625 |
Service Refill Capacities
| Brake / Hoist / Fan Hydraulic Tank | 137 gal (519 l) |
| Brake Hoist System – Includes Tank | 240 gal (908 l) |
| Cooling System | 175 gal (662 l) |
| Fuel Tank – Optional | 26,800-29,950 kg (59,084-66,028 lbs) |
| Fuel Tank – Standard | 851 gal (3,221 l) |
| Steering System – Including Tank | 50 gal (189 l) |
| Steering Tank | 34 gal (129 l) |
Suspension
| Effective Cylinder Stroke – Rear | 4 in (9 cm) |
| Rear axle – Oscillation | 4 degrees |
Transmission
| Forward – 1 | 7 mph (12 kph) |
| Forward – 2 | 10 mph (16 kph) |
| Forward – 3 | 13 mph (21 kph) |
| Forward – 4 | 18 mph (29 kph) |
| Forward – 5 | 24 mph (39 kph) |
| Forward – 6 | 33 mph (53 kph) |
| Max Speed | 33 mph (53 kph) |
| Number of Gears – Forward | 6 |
| Number of Gears – Reverse | 1 |
| Reverse | 7 mph (10 kph) |
| Transmission Type | Six-speed planetary power shift with direct injection |
Weights
| Body Weight | 225,500 lbs (102,285 kg) |
| Body Weight Range | 26 800-29 950 kg (59,000-71,500 lb) |
| Empty Weight | 299,101 lbs (135,670 kg) |
| Front Axle – Empty | 47% |
| Front Axle – Loaded | 33% |
| Loaded Weight | 700,000 lbs (317,515 kg) |
| Operating Weight – Loaded | SAE J1511 OCT90 ISO 5010:1992 lbs |
| Rear Axle – Empty | 53% |
| Rear Axle – Loaded | 67% |
| Weight Distribution Front – empty | 47% |
| Weight Distribution Front – loaded | 33% |
| Weight Distribution Rear – empty | 53% |
| Weight Distribution Rear – loaded | 67% |
