Contents
Articulating/Rigid
| Articulating/Rigid | Rigid |
Body Hoists
| Body Lower Time – Float | 19.26 seconds |
| Pump Flow – High Idle | 224 gpm (848 lpm) |
| Relief Valve Setting – Lower | 126 psi |
| Relief Valve Setting – Raise | 2955 psi |
Brakes
| Brake Standards | 25 |
| Brake Surface – Front | 13,921 cu in (228,125 cu cm) |
| Brake Surface – Rear | 20,847 cu in (341,622 cu cm) |
| Standards | J-ISO 3450 JAN88, ISO 3450:1996 |
Capacity – Dual Slope – 100% Fill Factor
| Heaped (SAE 2:1) | 169 cu yd (129 cu m) |
| Struck | 126 cu yd (96 cu m) |
Dimensions
| Centerline Front Tire Width | 19 ft (6 m) |
| Dump Ground Clearance | 5 ft (1 m) |
| Dump Height | 43 ft (13 m) |
| Front Canopy Height | 21 ft (7 m) |
| Ground Clearance | 3 ft (1 m) |
| Loading Height – Empty | 19 ft (6 m) |
| Operating Width | 25 ft (8 m) |
| Outside Body Width | 25 ft (8 m) |
| Overall Canopy Width | 25 ft (8 m) |
| Overall Height | 21 ft (7 m) |
| Overall Height – Body Raised | 43 ft (13 m) |
| Overall Length | 42 ft (13 m) |
| Overall Width | 25 ft (8 m) |
| Wheel Base | 19 ft (6 m) |
DRIVE SYSTEM
| Drive Config | 4×2 |
Dump
| Dump Angle | 45 degrees |
| Load Capacity – heaped | 169 cu yd (129 cu m) |
| Load Capacity – Struck | 126 cu yd (96 cu m) |
| Lower Time | 19.3 seconds |
| Raise Time | 20.3 seconds |
| Rated Payload | 480,000 lbs (217,725 kg) |
Engine
| Aspiration | 75 amps |
| Bore | 7 in (17 cm) |
| Displacement | 4,760 cu in (78,003 cu cm) |
| Engine Model | Cat 3516B HD EUI |
| Gross Power | 2,415 hp (1,801 kw) |
| Gross Power – SAE J1995 | 2,415 hp (1,801 kw) |
| Make | Cat |
| Model | 3516B HD EUI |
| Net Power | 2,337 hp (1,743 kw) |
| Net Power – 80/1269/EEC | 2,337 hp (1,743 kw) |
| Net Power – ISO 9249 | 2,337 hp (1,743 kw) |
| Net Power – SAE J1349 | 2,337 hp (1,743 kw) |
| Number of Cylinders | 16 |
| Power Measured @ | 1750 rpm |
| Rated Engine Speed | 203 rpm |
| Stroke | 9 in (22 cm) |
| Torque Measured @ | Turbocharged rpm |
| Torque Rise | 23% |
Final Drives
| Differential Ratio | 28.8:1 |
| Planetary Ratio | 0.667361111111111 |
| Total Reduction Ratio | 28.8:1 |
Operating Specifications
| Alternator Supplied Amperage | 75 amps |
| Body Capacity – SAE 2:1 | 169 cu yd (129 cu m) |
| Brake/Hoist System Fluid Capacity | 363 gal (1,375 l) |
| Cooling System Fluid Capacity | 257 gal (973 l) |
| Diff and Final Drive Fluid Capacity | 70 gal (265 l) |
| Engine Oil Capacity | 70 gal (265 l) |
| Fuel Capacity | 1,150 gal (4,353 l) |
| Hydraulic System Fluid Capacity | 203 gal (768 l) |
| Lower Time | 17.5 seconds |
| Nominal Payload Capacity | 480,000 lbs (217,725 kg) |
| Operating Voltage | 24 volts |
| Raise Time | 20.3 seconds |
| Steering System Fluid Capacity | 90 gal (341 l) |
| Tire Size | 40.00-R57(E4) |
| Top Speed – Loaded | 34 mph (54 kph) |
| Turning Diameter – Front | 107 ft (33 m) |
ROPS
| ROPS Standards | ISO 3471:1994 |
Service Refill Capacities
| Brake / Hoist / Fan Hydraulic Tank | 169 gal (640 l) |
| Brake Hoist System – Includes Tank | 363 gal (1,374 l) |
| Cooling System | 257 gal (973 l) |
| Differential – Final Drives | 70 gal (265 l) |
| Steering System – Including Tank | 90 gal (341 l) |
| Steering Tank | 60 gal (227 l) |
| Torque Converter – Transmission Sump | 27 gal (102 l) |
| Torque Converter/Transmission System – Including Sump | 50 gal (189 l) |
Sound
| Sound Standards | ANSI/SAE J1166 MAY90 |
Suspension
| Effective Cylinder Stroke – Rear | 23 in (58 cm) |
| Rear axle – Oscillation | 5.2 degrees |
Tires
| Standard Tires | 40.00R57 |
Transmission
| Forward – 1 | 7 mph (12 kph) |
| Forward – 2 | 10 mph (16 kph) |
| Forward – 3 | 13 mph (22 kph) |
| Forward – 4 | 18 mph (29 kph) |
| Forward – 5 | 25 mph (39 kph) |
| Forward – 6 | 34 mph (54 kph) |
| Max Speed | 34 mph (54 kph) |
| Number of Gears – Forward | 6 |
| Number of Gears – Reverse | 1 |
| Reverse | 7 mph (11 kph) |
| Transmission Type | Six-speed planetary powershift |
Weights
| Body Weight Range | 846000 |
| Empty Weight | 351,258 lbs (159,328 kg) |
| Front Axle – Empty | 46% |
| Front Axle – Loaded | 33% |
| Loaded Weight | 846,000 lbs (383,740 kg) |
| Operating Weight – Loaded | SAE J1511 OCT90, ISO 5010:1992 lbs |
| Rear Axle – Empty | 54% |
| Rear Axle – Loaded | 67% |
