Contents
Axles
| Front | Fixed |
| Rear | Trunnion |
Brakes
| Brakes | SAE J1473 OCT90, ISO 3450:1992 |
Engine
| Bore | 6 in (14 cm) |
| Displacement | 1,105 cu in (18,108 cu cm) |
| Engine Model | Cat C18 ACERT |
| Gross – ISO 14396 | 580 hp (433 kw) |
| Make | Cat |
| Model | C18 ACERT |
| Net Power | 541 hp (403 kw) |
| Net Power – SAE J1349 | 541 hp (403 kw) |
| Peak Power Speed – 1,500 rpm – Gross – ISO 14396 | 580 hp (433 kw) |
| Peak Power Speed – 1,500 rpm – Gross – SAE J1995 | 588 hp (438 kw) |
| Peak Power Speed – 1,500 rpm – Net Power – SAE J1349 | 541 hp (403 kw) |
| Peak Torque – 1,200 rpm | 2,104 lbs ft (2,853 nm) |
| Rated Speed | 1700 rpm |
| Stroke | 7 in (18 cm) |
| Torque Rise | 58% |
Hydraulic Cycle Times
| Dump | 2.2 seconds |
| Lower Float Down | 3.5 seconds |
| Rack Back | 4.5 seconds |
| Raise | 8 seconds |
| Total Hydraulic Cycle Time – Empty Bucket | 18.2 seconds |
Hydraulic System – Lift/Tilt
| Lift/Tilt System | Variable displacement piston |
| Maximum Flow at 1,400-1,860 rpm | 153 gpm (579 lpm) |
| Pilot System | Variable displacement piston |
Hydraulic System – Steering
| Steering Cycle Times – High Idle | 3.4 seconds |
| Steering Cycle Times – Low Idle | 5.6 seconds |
| Steering System – Circuit | Pilot, load sensing |
| Steering System – Pump | Piston, variable displacement |
Operating Specifications
| Cat Truck Match – High Lift | 773-775 |
| Cat Truck Match – Standard | 770-772 |
| Rated Bucket Capacity | 8-10 cu yd (6-8 cu m) |
| Rated Payload | 27,558 lbs (12,500 kg) |
| Rated Payload – High Lift | 27,558 lbs (12,500 kg) |
| Rated Payload – Standard | 27,558 lbs (12,500 kg) |
| Tipping Load – Articulated 37 degrees | 68,005 lbs (30,847 kg) |
| Tipping Load – Straight | 78,115 lbs (35,432 kg) |
Service Refill Capacities
| Cooling System | 32 gal (120 l) |
| Crankcase | 16 gal (60 l) |
| Diesel Exhaust Fluid Tank | 9 gal (33 l) |
| Differential – Final Drives – Front | 49 gal (186 l) |
| Differential – Final Drives – Rear | 49 gal (186 l) |
| Hydraulic System – Tank Only | 63 gal (240 l) |
| Hydraulic System Factory Fill | 126 gal (475 l) |
| Transmission | 32 gal (120 l) |
Sound Performance – Standard
| Machine Sound Level (ISO 6395) | 111 dB(A) |
| Operator Sound Level (ISO 6396) | 71 dB(A) |
Sound Performance – Suppression
| Machine Sound Level (ISO 6395) | 109 dB(A) |
| Operator Sound Level (ISO 6396) | 70 dB(A) |
Transmission
| Direct Drive – Forward 1 | Lock-up disabled |
| Transmission Type | Cat planetary power shift |
