Contents
Axles
| Front | Fixed |
| Maximum Single-Wheel Rise and Fall | 23 in (57 cm) |
| Oscillation Angle | 11 degrees |
| Rear | Oscillating |
Bucket
| Breakout Force | 133,650 lbs (60,623 kg) |
| Bucket Capacities | 12 cu yd (9 cu m) |
| Bucket Capacity – heaped | 11 cu yd (9 cu m) |
| Bucket Width | 15 ft (4 m) |
Cab
| Cab – ROPS/FOPS | Meets SAE and ISO standards |
Dimensions
| Ground Clearance | 2 ft (0 m) |
| Height – Top of Cab | 17 ft (5 m) |
| Wheelbase | 15 ft (5 m) |
Engine
| Bore | 5 in (14 cm) |
| Displacement | 1,666 cu in (27,301 cu cm) |
| Flywheel Power | 627 hp (468 kw) |
| Gross Power | 687 hp (512 kw) |
| Gross Power – ISO 3046-2 | 627 hp (468 kw) |
| Make | Cat |
| Model | C27 |
| Net Power | 627 hp (468 kw) |
| Net Power – EEC 80/1269 | 627 hp (468 kw) |
| Net Power – ISO 14396 | 669 hp (499 kw) |
| Net Power – ISO 9249 | 627 hp (468 kw) |
| Net Power – SAE J1349 | 621 hp (463 kw) |
| Power Measured @ | 2000 rpm |
| Stroke | 6 in (15 cm) |
Hydraulic Cycle Times
| Dump | 2.9 seconds |
| Raise | 9.2 seconds |
| Total Hydraulic Cycle Time | 15.9 seconds |
Hydraulic System
| Dump Time | 2.9 seconds |
| Lower Time | 3.8 seconds |
| Raise Time | 9.2 seconds |
Loader Hydraulic System
| Cylinders, Double Acting – Lift, Bore and Stroke | 234 mm 1270 mm (9.25 in 50 in) |
| Cylinders, Double Acting – Tilt, Bore and Stroke | 292 mm 820 mm (11.5 in 32.3 in) |
| Relief Valve Setting | 4500 psi |
| Relief Valve Setting – Low Idle | 350 psi |
Operating Specifications
| Cooling System Fluid Capacity | 50 gal (190 l) |
| Front Axle/Diff Fluid Capacity | 72 gal (271 l) |
| Hinge Pin Height, Unloaded | 19 ft (6 m) |
| Operating Voltage | 24 volts |
| Rated Bucket Capacity | 11-12 cu yd (8-9 cu m) |
| Rated Payload | 33,000 lbs (14,969 kg) |
| Rear Axle Oscillation | 22 degrees |
| Tipping Load – Articulated 37 degrees | 77,799 lbs (35,289 kg) |
| Transmission Fluid Capacity | 29 gal (110 l) |
Service Refill Capacities
| Cooling System | 50 gal (190 l) |
| Crankcase | 25 gal (95 l) |
| Differential – Final Drives – Front | 72 gal (271 l) |
| Differential – Final Drives – Rear | 69 gal (261 l) |
| Fuel Tank | 284 gal (1,075 l) |
| Hydraulic System – Lift/Tilt and Brakes | 113 gal (428 l) |
| Hydraulic System – Steering and Engine Cooling Fan | 51 gal (191 l) |
| Hydraulic System – Tank Only | 46 gal (174 l) |
| Transmission | 29 gal (110 l) |
Steering System
| Minimum Turning Radius – Over Bucket | 407 in (1,034 cm) |
| Steering | Meets SAE and ISO standards |
| Steering Angle – Each Direction | 35 degrees |
| Total Steering Angle | 70 degrees |
Tires
| Tires | Tires used for measurement – 41.25/70-39 42 ply |
Transmission
| Converter Drive – Forward 1 | 4 mph (7 kph) |
| Converter Drive – Forward 2 | 8 mph (12 kph) |
| Converter Drive – Forward 3 | 13 mph (21 kph) |
| Converter Drive – Reverse 1 | 5 mph (8 kph) |
| Converter Drive – Reverse 2 | 8 mph (13 kph) |
| Converter Drive – Reverse 3 | 14 mph (23 kph) |
| Direct Drive – Forward 1 | Lock-up disabled |
| Direct Drive – Forward 2 | 8 mph (13 kph) |
| Direct Drive – Forward 3 | 14 mph (22 kph) |
| Direct Drive – Reverse 1 | 5 mph (8 kph) |
| Direct Drive – Reverse 2 | 9 mph (14 kph) |
| Direct Drive – Reverse 3 | 15 mph (25 kph) |
| Forward – 1 | 4 mph (7 kph) |
| Forward – 2 | 8 mph (13 kph) |
| Forward – 3 | 14 mph (23 kph) |
| Max Speed – Forward | 14 mph (23 kph) |
| Max Speed – Reverse | 16 mph (25 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Reverse – 1 | 5 mph (8 kph) |
| Reverse – 2 | 9 mph (14 kph) |
| Reverse – 3 | 16 mph (25 kph) |
| Transmission Type | Powershift |
Weights
| Operating Weight | 172,270 lbs (78,140 kg) |
| Operational Weight | 171,642 lbs (77,856 kg) |
