Contents
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Max Lift Above Ground | 18 in (46 cm) |
| Max Reach Outside Tires – Left | 73 in (184 cm) |
| Max Reach Outside Tires – Right | 75 in (191 cm) |
| Shift Left | 25 in (63 cm) |
| Shift Right | 25 in (63 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Front Ground Clearance | 1 ft (0 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
Engine
| Max Power | 155 hp (116 kw) |
| Net Power Gear 1-2 | 135 hp (101 kw) |
| Net Power Gear 4-6 | 155 hp (116 kw) |
| Net Power Gear 5-6 | 155 hp (116 kw) |
| Net Power Gears 7-8 | 155 hp (116 kw) |
| Net Torque Gears 7-8 | 626 lbs ft (848 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1000 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 38 gpm (144 lpm) |
| Relief Valve Pressure | 3500 psi |
Moldboard
| Blade Down Pressure | 21,654 lbs (9,822 kg) |
| Blade Pull at Max Weight | 25,364 lbs (11,505 kg) |
| Max Depth of Cut | 31 in (78 cm) |
| Moldboard Height | 24 in (61 cm) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 21 in (53 cm) |
| Side Shift Right | 26 in (66 cm) |
Operating Specifications
| Alternator Supplied Amperage | 35 amps |
| Circle Gearbox Fluid Capacity | 2 gal (7 l) |
| Cooling System Fluid Capacity | 10 gal (39 l) |
| Operating Voltage | 24 volts |
| Std Operation Weight – Front Axle | 8,242 lbs (3,739 kg) |
| Std Operation Weight – Rear Axle | 20,598 lbs (9,343 kg) |
| Tandem Case Fluid Capacity (each) | 13 gal (48 l) |
| Tire Size | 13-24 10 PR (G-2) |
Steering System
| Articulation Angle | 20 degrees |
Transmission
| Max Speed – Forward | 26 mph (42 kph) |
| Max Speed – Reverse | 21 mph (33 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
| Transmission Type | direct drive, powershift |
