Contents
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 60 in (153 cm) |
| Max Lift Above Ground | 19 in (48 cm) |
| Max Reach Outside Tires – Left | 75 in (189 cm) |
| Max Reach Outside Tires – Right | 78 in (198 cm) |
| Shift Left | 27 in (70 cm) |
| Shift Right | 29 in (73 cm) |
Dimensions
| Blade Base | 8 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Height to Top of Isomount Cab | 10 ft (3 m) |
| Overall Length | 29 ft (9 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 20 ft (6 m) |
| Width Over Tires | 8 ft (3 m) |
Engine
| Displacement | 629 cu in (10,307 cu cm) |
| Engine Model | 3176C DITA ATAAC VHP |
| Max Power | 205 hp (153 kw) |
| Net Power Gear 1-2 | 165 hp (123 kw) |
| Net Power Gear 4-6 | 185 hp (138 kw) |
| Net Power Gear 5-6 | 185 hp (138 kw) |
| Net Power Gears 7-8 | 205 hp (153 kw) |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 54 gpm (206 lpm) |
| Pump Type | axial piston |
| Relief Valve Pressure | 3500 psi |
Moldboard
| Blade Down Pressure | 30,126 lbs (13,665 kg) |
| Blade Pull at Max Weight | 43,977 lbs (19,948 kg) |
| Max Depth of Cut | 28 in (71 cm) |
| Moldboard Height | 24 in (61 cm) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 21 in (52 cm) |
| Side Shift Right | 26 in (66 cm) |
Operating Specifications
| Circle Gearbox Fluid Capacity | 2 gal (7 l) |
| Cooling System Fluid Capacity | 10 gal (38 l) |
| Fuel Capacity | 105 gal (397 l) |
| Hydraulic System Fluid Capacity | 21 gal (79 l) |
| Max Operation Weight – Front Axle | 17,443 lbs (7,912 kg) |
| Max Operation Weight – Rear Axle | 31,420 lbs (14,252 kg) |
| Max Operation Weight – Total | 48,863 lbs (22,164 kg) |
| Std Operation Weight – Front Axle | 9,493 lbs (4,306 kg) |
| Std Operation Weight – Rear Axle | 24,177 lbs (10,967 kg) |
| Std Operation Weight – Total | 33,670 lbs (15,272 kg) |
| Tandem Case Fluid Capacity (each) | 17 gal (64 l) |
Steering System
| Articulation Angle | 20 degrees |
| Turning Radius | 25 ft (7 m) |
Transmission
| Max Speed – Forward | 27 mph (44 kph) |
| Max Speed – Reverse | 22 mph (35 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
| Transmission Type | direct drive, power shift |
