Contents
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Max Lift Above Ground | 18 in (45 cm) |
| Max Reach Outside Tires – Left | 88 in (223 cm) |
| Max Reach Outside Tires – Right | 89 in (226 cm) |
| Shift Left | 33 in (85 cm) |
| Shift Right | 35 in (88 cm) |
Dimensions
| Blade Base | 8 ft (3 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
Engine
| Max Power | 200 hp (149 kw) |
| Net Power Gear 1-2 | 180 hp (134 kw) |
| Net Power Gear 5-6 | 200 hp (149 kw) |
| Net Power Gears 7-8 | 200 hp (149 kw) |
| Net Torque Gears 7-8 | 841 lbs ft (1,140 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1000 rpm |
Front Axle
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Type | Axial Piston |
Moldboard
| Blade Down Pressure | 30,442 lbs (13,808 kg) |
| Blade Pull at Max Weight | 44,249 lbs (20,071 kg) |
| Max Depth of Cut | 30 in (77 cm) |
| Moldboard Height | 27 in (69 cm) |
| Moldboard Thickness | 1 in (3 cm) |
| Side Shift Left | 34 in (85 cm) |
| Side Shift Right | 37 in (94 cm) |
Operating Specifications
| Circle Gearbox Fluid Capacity | 2 gal (7 l) |
| Cooling System Fluid Capacity | 10 gal (38 l) |
| Hydraulic System Fluid Capacity | 21 gal (80 l) |
| Max Operation Weight – Front Axle | 18,323 lbs (8,311 kg) |
| Max Operation Weight – Rear Axle | 33,003 lbs (14,970 kg) |
| Max Operation Weight – Total | 51,326 lbs (23,281 kg) |
| Operating Voltage | 24 volts |
| Rear Diff/Final Drive Fluid Capacity | 13 gal (47 l) |
| Std Operation Weight – Front Axle | 10,117 lbs (4,589 kg) |
| Std Operation Weight – Rear Axle | 25,774 lbs (11,691 kg) |
| Tandem Case Fluid Capacity (each) | 17 gal (64 l) |
Steering System
| Articulation Angle | 20 degrees |
| Turning Radius | 24 ft (7 m) |
Transmission
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
