Contents
Blades
| Blade Tip Range – Backward | 5 degrees |
| Blade Tip Range – Forward | 40 degrees |
| Circle Centershift – Left | 26 in (65 cm) |
| Circle Centershift – Right | 24 in (60 cm) |
| Maximum Blade Position Angle | 65 degrees |
| Maximum Depth of Cut | 19 in (49 cm) |
| Maximum Lift Above Ground | 16 in (40 cm) |
| Maximum Shoulder Reach Outside of Tires – Left | 90 in (229 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 102 in (259 cm) |
| Moldboard Sideshift – Left | 26 in (65 cm) |
| Moldboard Sideshift – Right | 43 in (109 cm) |
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 72 in (182 cm) |
| Max Lift Above Ground | 16 in (40 cm) |
| Max Reach Outside Tires – Left | 90 in (229 cm) |
| Max Reach Outside Tires – Right | 102 in (259 cm) |
| Shift Left | 26 in (65 cm) |
| Shift Right | 24 in (60 cm) |
Dimensions
| Blade Base | 10 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Ground Clearance – Rear Axle | 16 in (41 cm) |
| Height – Exhaust Stack | 134 in (341 cm) |
| Height – Front Axle Center | 27 in (69 cm) |
| Height – Top of Cab | 12 ft (4 m) |
| Height – Top of Cylinders | 122 in (309 cm) |
| Height to Top of Isomount Cab | 12 ft (4 m) |
| Length – Between Tandem Axles | 73 in (184 cm) |
| Length – Counterweight to Ripper | 460 in (1,167 cm) |
| Length – Front Axle to Mid Tandem | 275 in (698 cm) |
| Length – Front Axle to Moldboard | 121 in (307 cm) |
| Length – Front Tire to Rear of Machine | 392 in (996 cm) |
| Overall Length | 33 ft (10 m) |
| Rear Ground Clearance | 1 ft (0 m) |
| Tandem Axle Wheelbase | 6 ft (2 m) |
| Wheelbase | 23 ft (7 m) |
| Width – Outside Front Tires | 122 in (310 cm) |
| Width – Outside Rear Tires | 122 in (310 cm) |
| Width – Tire Center Lines | 99 in (251 cm) |
| Width Over Tires | 10 ft (3 m) |
Engine
| Base Power (1st Gear) – Net | 297 hp (221 kw) |
| Base Power (All Gears) – Net | 297 hp (221 kw) |
| Bore | 5 in (13 cm) |
| Derating Altitude | 15,000 ft (4,572 m) |
| Displacement | 763 cu in (12,503 cu cm) |
| Engine Model | Cat C13 ACERT VHP |
| High – Ambient Capability | 122 degrees |
| Max Power | 312 hp (233 kw) |
| Maximum Torque | 1,261 lbs ft (1,710 nm) |
| Net Power Gear 1-2 | 302 hp (225 kw) |
| Net Power Gear 4-6 | 312 hp (233 kw) |
| Net Power Gear 5-6 | 312 hp (233 kw) |
| Net Power Gears 7-8 | 312 hp (233 kw) |
| Net Torque Gears 7-8 | 1,261 lbs ft (1,710 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Standard – Ambient Capability | 109 degrees |
| Stroke | 6 in (16 cm) |
Frame
| Circle – Blade Beam Thickness | 2 in (5 cm) |
| Circle – Diameter | 72 in (182 cm) |
| Drawbar – Height | 8 in (20 cm) |
| Front Axle – Height to Center | 27 in (69 cm) |
| Front Axle – Total Oscillation per Side | 32 degrees |
| Front Axle – Wheel Lean – Left/Right | 18.2 degrees |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 18.2 degrees |
Hydraulic System
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Maximum System Pressure | 3500 psi |
| Pump Flow | 74 gpm (280 lpm) |
| Pump Output | 74 gpm (280 lpm) |
| Pump Type | Variable piston |
| Relief Valve Pressure | 3500 psi |
| Reservoir Tank Capacity | 17 gal (65 l) |
| Standby Pressure | 450 psi |
Moldboard
| Arc Radius | 16 in (41 cm) |
| Blade Down Pressure | 42,957 lbs (19,485 kg) |
| Blade Down Pressure – Base GVW | 29,154 lbs (13,224 kg) |
| Blade Down Pressure – Maximum GVW | 44,047 lbs (19,979 kg) |
| Blade Pull – Maximum GVW | 48,554 lbs (22,024 kg) |
| Blade Pull at Max Weight | 49,156 lbs (22,297 kg) |
| Blade Width | 16 ft (5 m) |
| Cutting Edge Thickness | 1 in (3 cm) |
| Cutting Edge Width | 8 in (20 cm) |
| End Bit – Thickness | 1 in (2 cm) |
| End Bit – Width | 6 in (15 cm) |
| Max Depth of Cut | 19 in (49 cm) |
| Moldboard – Height | 31 in (79 cm) |
| Moldboard – Thickness | 1 in (3 cm) |
| Moldboard Height | 31 in (79 cm) |
| Moldboard Length | 16 ft (5 m) |
| Moldboard Thickness | 1 in (3 cm) |
| Moldboard Width | 16 ft (5 m) |
| Side Shift Left | 26 in (65 cm) |
| Side Shift Right | 43 in (109 cm) |
| Throat Clearance | 5 in (12 cm) |
Operating Specifications
| Articulation Angle – Left/Right | 20 degrees |
| Circle Gearbox Fluid Capacity | 2 gal (8 l) |
| Cooling System Fluid Capacity | 12 gal (47 l) |
| Forward – 1st | 3 mph (5 kph) |
| Forward – 2nd | 4 mph (6 kph) |
| Forward – 3rd | 6 mph (9 kph) |
| Forward – 4th | 8 mph (12 kph) |
| Forward – 5th | 12 mph (19 kph) |
| Forward – 6th | 17 mph (27 kph) |
| Forward – 7th | 23 mph (37 kph) |
| Forward – 8th | 34 mph (54 kph) |
| Fuel Capacity | 135 gal (511 l) |
| Hydraulic System Fluid Capacity | 30 gal (114 l) |
| Max Operation Weight – Front Axle | 24,073 lbs (10,919 kg) |
| Max Operation Weight – Rear Axle | 54,570 lbs (24,753 kg) |
| Max Operation Weight – Total | 78,643 lbs (35,672 kg) |
| Operating Weight | 57,452 lbs (26,060 kg) |
| Rear Diff/Final Drive Fluid Capacity | 30 gal (114 l) |
| Reverse – 1st | 2.2 |
| Reverse – 2nd | 4 mph (7 kph) |
| Reverse – 3rd | 6 mph (10 kph) |
| Reverse – 4th | 10 mph (15 kph) |
| Reverse – 5th | 18 mph (29 kph) |
| Reverse – 6th | 27 mph (43 kph) |
| Std Operation Weight – Front Axle | 15,679 lbs (7,112 kg) |
| Std Operation Weight – Rear Axle | 41,773 lbs (18,948 kg) |
| Std Operation Weight – Total | 57,452 lbs (26,060 kg) |
| Steering Range – Left/Right | 47.5 degrees |
| Tandem Case Fluid Capacity (each) | 32 gal (121 l) |
| Tire Size | 18.00-25 12PR (G-2) |
| Top Speed – Forward | 34 mph (54 kph) |
| Top Speed – Reverse | 27 mph (43 kph) |
| Turning Radius – Outside Front Tires | 29 ft (9 m) |
Power Train
| Brakes – Parking | Spring applied, hydraulically released |
| Brakes – Secondary | Oil-actuated, oil-disc |
| Brakes – Service | Oil-actuated, oil-disc |
| Brakes – Service – Surface Area | 7,724 cu in (126,574 cu cm) |
| Forward/Reverse Gears | 8 Fwd/6 Rev |
| Transmission | Direct drive, power shift, countershaft |
Ripper
| Machine Length Increase, Beam Raised | 63 in (161 cm) |
| Penetration Force | 22,140 lbs (10,043 kg) |
| Pry-Out Force | 33,788 lbs (15,326 kg) |
| Ripper Shank Holders | 7 |
| Ripping Depth – Maximum | 18 in (45 cm) |
| Shank Holder Spacing – Maximum | 20 in (51 cm) |
| Shank Holder Spacing – Minimum | 18 in (44 cm) |
Service Refill
| Circle Drive Housing | 2 gal (8 l) |
| Cooling System | 12 gal (47 l) |
| Engine Oil | 8 gal (30 l) |
| Front Wheel Spindle Bearing Housing | 0 gal (1 l) |
| Fuel Capacity | 130 gal (492 l) |
| Hydraulic System – Tank | 17 gal (65 l) |
| Hydraulic System – Total | 30 gal (114 l) |
| Tandem Housing – Each | 32 gal (121 l) |
| Transmission – Differential – Final Drives | 30 gal (114 l) |
Steering System
| Articulation Angle | 20 degrees |
| Turning Radius | 29 ft (9 m) |
Tandems
| Drive Chain Pitch | 3 in (6 cm) |
| Height | 26 in (65 cm) |
| Sidewall Thickness – Inner | 1 in (2 cm) |
| Sidewall Thickness – Outer | 1 in (2 cm) |
| Tandem Oscillation – Front Down | 25 degrees |
| Tandem Oscillation – Front Up | 15 degrees |
| Wheel Axle Spacing | 73 in (184 cm) |
| Width | 9 in (24 cm) |
Transmission
| Max Speed – Forward | 34 mph (54 kph) |
| Max Speed – Reverse | 27 mph (43 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 6 |
| Transmission Type | direct drive, power shift, countershaft |
Weights
| Gross Vehicle Weight – Base – Front Axle | 16,345 lbs (7,414 kg) |
| Gross Vehicle Weight – Base – Rear Axle | 43,090 lbs (19,545 kg) |
| Gross Vehicle Weight – Base – Total | 59,435 lbs (26,959 kg) |
| Gross Vehicle Weight – Maximum – Front Axle | 24,694 lbs (11,201 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle | 53,949 lbs (24,471 kg) |
| Gross Vehicle Weight – Maximum – Total | 78,643 lbs (35,672 kg) |
