Contents
Circle
| Blade cutting depth | 2 ft (1 m) |
| Blade ground clearance | 2 ft (0 m) |
| Blade Tip Angle – Front | 46 degrees |
| Blade Tip Angle – Rear | 13 degrees |
| Diameter | 67 in (169 cm) |
| Rotation | 360 degrees |
| Shift Left | 18 in (45 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Overall Height with cab | 12 ft (4 m) |
| Overall Length | 29 ft (9 m) |
| Overall width | 9 ft (3 m) |
| Tread width | 91 in (231 cm) |
| Wheelbase | 21 ft (6 m) |
Engine
| Aspiration | Turbocharged |
| Bore | 5 in (13 cm) |
| Displacement | 610 cu in (10,001 cu cm) |
| Engine Model | LT-10-C |
| Gross horsepower | 215 hp (160 kw) |
| Net Power | 200 hp (149 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Stroke | 5 in (14 cm) |
| Torque | 630 lbs ft (854 nm) |
| Torque Measured @ | 1300 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 16 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 48 gpm (182 lpm) |
| Relief Valve Pressure | 2500 psi |
Moldboard
| Moldboard Height | 31 in (79 cm) |
| Moldboard Thickness | 1 in (3 cm) |
| Moldboard Width | 14 ft (4 m) |
| Side Shift Left | 54 in (136 cm) |
Operating Specifications
| Cooling System Fluid Capacity | 11 gal (41 l) |
| Fuel Capacity | 100 gal (379 l) |
| Hydraulic System Fluid Capacity | 24 gal (90 l) |
| Oil System Fluid Capacity | 10 gal (39 l) |
| Rear Diff/Final Drive Fluid Capacity | 9 gal (34 l) |
| Std Operation Weight – Front Axle | 12,160 lbs (5,516 kg) |
| Std Operation Weight – Rear Axle | 28,440 lbs (12,900 kg) |
| Std Operation Weight – Total | 40,600 lbs (18,416 kg) |
| Tandem Case Fluid Capacity (each) | 28 gal (105 l) |
| Tire Size | 16.00 * 24, G-2 |
| Transmission Fluid Capacity | 10 gal (39 l) |
Steering System
| Articulation Angle | 22 degrees |
| Turning Radius | 26 ft (8 m) |
Transmission
| Max Speed – Forward | 24 mph (39 kph) |
| Max Speed – Reverse | 17 mph (28 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | Powershift |
