Contents
Blades
| Maximum Shoulder Reach Outside of Tires – Left | 79 in (201 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 79 in (201 cm) |
| Moldboard Sideshift – Left | 25 in (63 cm) |
| Moldboard Sideshift – Right | 25 in (63 cm) |
Circle
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 60 in (153 cm) |
| Max Lift Above Ground | 20 in (51 cm) |
| Rotation | 360 degrees |
| Shift Left | 24 in (61 cm) |
| Shift Right | 24 in (61 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Height to Top of Isomount Cab | 10 ft (3 m) |
| Overall Length | 34 ft (10 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 20 ft (6 m) |
| Width Over Tires | 8 ft (3 m) |
Engine
| Aspiration | Turbocharged and air-to-air aftercooled |
| Base Power (1st Gear) – Net | 180 hp (134 kw) |
| Displacement | 505 cu in (8,275 cu cm) |
| Engine Model | SAA6D114E-3 |
| Max Power | 200 hp (149 kw) |
| Net Power Gear 1-2 | 180 hp (134 kw) |
| Net Power Gear 4-6 | 200 hp (149 kw) |
| Net Power Gear 5-6 | 200 hp (149 kw) |
| Net Power Gears 7-8 | 200 hp (149 kw) |
| Net Torque Gears 1-2 | 612 lbs ft (830 nm) |
| Net Torque Gears 3-4 | 719 lbs ft (975 nm) |
| Net Torque Gears 5-6 | 719 lbs ft (975 nm) |
| Net Torque Gears 7-8 | 719 lbs ft (975 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 1900 rpm |
| Torque Measured @ | 1400 rpm |
Front Axle
| Ground Clearance | 25 ft (8 m) |
| Oscillation – Total | 32 degrees |
| Wheel Lean | 20 degrees |
Hydraulic System
| Pump Flow | 51 gpm (193 lpm) |
| Pump Type | Load-sensing closed center hydraulics with variable displacement piston pump |
| Relief Valve Pressure | 3000 psi |
Moldboard
| Max Depth of Cut | 32 in (82 cm) |
| Moldboard Height | 26 in (66 cm) |
| Moldboard Length | 12 ft (4 m) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 32 in (82 cm) |
| Side Shift Right | 32 in (82 cm) |
Operating Specifications
| Alternator Supplied Amperage | 90 amps |
| Circle Gearbox Fluid Capacity | 1 gal (5 l) |
| Cooling System Fluid Capacity | 10 gal (39 l) |
| Fuel Capacity | 90 gal (340 l) |
| Hydraulic System Fluid Capacity | 26 gal (100 l) |
| Oil System Fluid Capacity | 8 gal (30 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 37,801 lbs (17,146 kg) |
| Std Operation Weight – Front Axle | 9,039 lbs (4,100 kg) |
| Std Operation Weight – Rear Axle | 24,912 lbs (11,300 kg) |
| Std Operation Weight – Total | 33,951 lbs (15,400 kg) |
| Tandem Case Fluid Capacity (each) | 22 gal (83 l) |
| Tire Size | low pressure, tubeless, 17.5R25 |
| Transmission Fluid Capacity | 12 gal (45 l) |
Steering System
| Articulation Angle | 23 degrees |
| Turning Radius | 23 ft (7 m) |
Transmission
| Max Speed – Forward | 26 mph (42 kph) |
| Max Speed – Reverse | 24 mph (38 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | Full power shift transmission |
