Contents
Blades
| Maximum Shoulder Reach Outside of Tires – Left | 6 in (16 cm) |
| Maximum Shoulder Reach Outside of Tires – Right | 7 in (18 cm) |
| Moldboard Sideshift – Left | 21 in (53 cm) |
| Moldboard Sideshift – Right | 28 in (71 cm) |
Circle
| Blade Tip Angle – Front | 5 degrees |
| Blade Tip Angle – Rear | 42 degrees |
| Diameter | 69 in (176 cm) |
| Max Lift Above Ground | 18 in (45 cm) |
| Max Reach Outside Tires – Left | 78 in (198 cm) |
| Max Reach Outside Tires – Right | 86 in (217 cm) |
| Rotation | 360 degrees |
Dimensions
| Blade Base | 9 ft (3 m) |
| Front Ground Clearance | 1 ft (0 m) |
| Height to Top of Isomount Cab | 10 ft (3 m) |
| Overall Length | 28 ft (9 m) |
| Rear Ground Clearance | 2 ft (1 m) |
| Tandem Axle Wheelbase | 5 ft (2 m) |
| Wheelbase | 21 ft (6 m) |
| Width Over Tires | 8 ft (3 m) |
Engine
| Aspiration | Turbocharged |
| Base Power (1st Gear) – Net | 140 hp (104 kw) |
| Displacement | 409 cu in (6,701 cu cm) |
| Engine Model | QSB 6.7L |
| Max Power | 160 hp (119 kw) |
| Net Power Gears 7-8 | 160 hp (119 kw) |
| Net Torque Gears 7-8 | 550 lbs ft (746 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 2200 rpm |
| Torque Measured @ | 1500 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 19 degrees |
| Wheel Lean | 17.5 degrees |
Hydraulic System
| Pump Flow | 49 gpm (185 lpm) |
| Pump Type | Piston pump, variable displacement |
| Relief Valve Pressure | 2600 psi |
Moldboard
| Blade Down Pressure | 14,788 lbs (6,708 kg) |
| Moldboard Height | 25 in (62 cm) |
| Moldboard Length | 12 ft (4 m) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 21 in (53 cm) |
| Side Shift Right | 28 in (71 cm) |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Circle Gearbox Fluid Capacity | 1 gal (3 l) |
| Cooling System Fluid Capacity | 11 gal (40 l) |
| Fuel Capacity | 90 gal (341 l) |
| Hydraulic System Fluid Capacity | 48 gal (180 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 29,918 lbs (13,571 kg) |
| Std Operation Weight – Front Axle | 8,172 lbs (3,707 kg) |
| Std Operation Weight – Rear Axle | 21,746 lbs (9,864 kg) |
| Std Operation Weight – Total | 29,918 lbs (13,571 kg) |
| Tandem Case Fluid Capacity (each) | 8 gal (29 l) |
| Tire Size | 14.00X24 10 Ply G2 |
| Transmission Fluid Capacity | 5 gal (18 l) |
Steering System
| Articulation Angle | 25 degrees |
| Turning Radius | 23,786 ft (7,250 m) |
Transmission
| Max Speed – Forward | 27 mph (43 kph) |
| Max Speed – Reverse | 18 mph (28 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | Full power shift direct drive |
