Contents
Circle
| Blade Tip Angle – Front | 47 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 66 in (168 cm) |
| Max Lift Above Ground | 17 in (43 cm) |
| Max Reach Outside Tires – Left | 80 in (202 cm) |
| Max Reach Outside Tires – Right | 81 in (204 cm) |
| Rotation | 360 degrees |
| Shift Left | 31 in (77 cm) |
| Shift Right | 30 in (75 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Height to Top of Isomount Cab | 10 ft (3 m) |
| Overall Length | 30 ft (9 m) |
| Wheelbase | 20 ft (6 m) |
| Width Over Tires | 8 ft (2 m) |
Engine
| Aspiration | Turbocharged |
| Displacement | 436 cu in (7,145 cu cm) |
| Engine Model | D7DGAE2 |
| Max Power | 173 hp (129 kw) |
| Net Power Gears 7-8 | 173 hp (129 kw) |
| Net Torque Gears 7-8 | 591 lbs ft (801 nm) |
| Power Measured @ | 2200 rpm |
| Torque Measured @ | 1400 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 16 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 75 gpm (284 lpm) |
| Pump Type | load sensing hydraulic |
| Relief Valve Pressure | 2700 psi |
Moldboard
| Blade Down Pressure | 16,968 lbs (7,697 kg) |
| Blade Pull at Max Weight | 20,157 lbs (9,143 kg) |
| Max Depth of Cut | 32 in (81 cm) |
| Moldboard Height | 25 in (63 cm) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 27 in (67 cm) |
| Side Shift Right | 27 in (67 cm) |
Operating Specifications
| Alternator Supplied Amperage | 75 amps |
| Cooling System Fluid Capacity | 13 gal (47 l) |
| Fuel Capacity | 100 gal (379 l) |
| Hydraulic System Fluid Capacity | 35 gal (134 l) |
| Operating Voltage | 24 volts |
| Rear Diff/Final Drive Fluid Capacity | 6 gal (23 l) |
| Std Operation Weight – Front Axle | 9,687 lbs (4,394 kg) |
| Std Operation Weight – Rear Axle | 23,715 lbs (10,757 kg) |
| Std Operation Weight – Total | 33,400 lbs (15,150 kg) |
| Tandem Case Fluid Capacity (each) | 27 gal (100 l) |
| Tire Size | 13.00 x 24, G-2 |
| Transmission Fluid Capacity | 10 gal (38 l) |
Steering System
| Articulation Angle | 22 degrees |
Transmission
| Max Speed – Forward | 25 mph (40 kph) |
| Max Speed – Reverse | 18 mph (29 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | Powershift |
