Contents
Circle
| Blade Tip Angle – Front | 44 degrees |
| Blade Tip Angle – Rear | 6.5 degrees |
| Diameter | 66 in (168 cm) |
| Max Lift Above Ground | 18 in (44 cm) |
| Max Reach Outside Tires – Left | 80 in (202 cm) |
| Max Reach Outside Tires – Right | 79 in (201 cm) |
| Rotation | 360 degrees |
| Shift Left | 31 in (77 cm) |
| Shift Right | 30 in (75 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Height to Top of Isomount Cab | 10 ft (3 m) |
| Overall Length | 30 ft (9 m) |
| Wheelbase | 9 ft (3 m) |
| Width Over Tires | 8 ft (3 m) |
Engine
| Aspiration | Turbocharged |
| Displacement | 586 cu in (9,603 cu cm) |
| Engine Model | D10BGAE2 |
| Max Power | 243 hp (181 kw) |
| Net Power Gears 7-8 | 243 hp (181 kw) |
| Net Torque Gears 7-8 | 846 lbs ft (1,147 nm) |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1100 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 16 degrees |
| Wheel Lean | 15 degrees |
Hydraulic System
| Pump Flow | 75 gpm (284 lpm) |
| Pump Type | load sensing hydraulic |
| Relief Valve Pressure | 2700 psi |
Moldboard
| Blade Down Pressure | 20,308 lbs (9,212 kg) |
| Blade Pull at Max Weight | 24,098 lbs (10,931 kg) |
| Max Depth of Cut | 32 in (81 cm) |
| Moldboard Height | 29 in (74 cm) |
| Moldboard Thickness | 1 in (3 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 27 in (67 cm) |
| Side Shift Right | 27 in (67 cm) |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 8 gal (31 l) |
| Fuel Capacity | 120 gal (454 l) |
| Hydraulic System Fluid Capacity | 35 gal (134 l) |
| Operating Voltage | 24 volts |
| Rear Diff/Final Drive Fluid Capacity | 6 gal (23 l) |
| Std Operation Weight – Front Axle | 11,475 lbs (5,205 kg) |
| Std Operation Weight – Rear Axle | 26,775 lbs (12,145 kg) |
| Std Operation Weight – Total | 38,250 lbs (17,350 kg) |
| Tandem Case Fluid Capacity (each) | 27 gal (100 l) |
| Tire Size | 14.00 x 24, G-2 |
| Transmission Fluid Capacity | 10 gal (38 l) |
Steering System
| Articulation Angle | 22 degrees |
Transmission
| Max Speed – Forward | 27 mph (44 kph) |
| Max Speed – Reverse | 20 mph (31 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | Powershift |
