Contents
Circle
| Blade Tip Angle – Front | 47 degrees |
| Blade Tip Angle – Rear | 5 degrees |
| Diameter | 64 in (163 cm) |
| Max Lift Above Ground | 19 in (49 cm) |
| Max Reach Outside Tires – Left | 80 in (203 cm) |
| Max Reach Outside Tires – Right | 79 in (201 cm) |
| Rotation | 360 degrees |
| Shift Left | 31 in (77 cm) |
| Shift Right | 30 in (75 cm) |
Dimensions
| Blade Base | 9 ft (3 m) |
| Front Ground Clearance | 2 ft (1 m) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Overall Length | 29 ft (9 m) |
| Wheelbase | 21 ft (6 m) |
| Width Over Tires | 8 ft (3 m) |
Engine
| Aspiration | Turbocharged, Aftercooled |
| Displacement | 436 cu in (7,145 cu cm) |
| Engine Model | D7EGCE3 |
| Max Power | 204 hp (152 kw) |
| Net Power Gears 7-8 | 204 hp (152 kw) |
| Net Torque Gears 7-8 | 684 lbs ft (927 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 1800 rpm |
| Torque Measured @ | 1550 rpm |
Front Axle
| Ground Clearance | 2 ft (1 m) |
| Oscillation – Total | 16 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 55 gpm (208 lpm) |
| Pump Type | Axial piston pump |
| Relief Valve Pressure | 3000 psi |
Moldboard
| Blade Down Pressure | 18,021 lbs (8,174 kg) |
| Blade Pull at Max Weight | 28,260 lbs (12,819 kg) |
| Max Depth of Cut | 31 in (79 cm) |
| Moldboard Height | 25 in (63 cm) |
| Moldboard Thickness | 1 in (2 cm) |
| Moldboard Width | 12 ft (4 m) |
| Side Shift Left | 27 in (67 cm) |
| Side Shift Right | 27 in (67 cm) |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 8 gal (31 l) |
| Fuel Capacity | 92 gal (348 l) |
| Hydraulic System Fluid Capacity | 24 gal (91 l) |
| Max Operation Weight – Front Axle | 16,700 lbs (7,575 kg) |
| Max Operation Weight – Rear Axle | 31,400 lbs (14,243 kg) |
| Max Operation Weight – Total | 42,500 lbs (19,278 kg) |
| Oil System Fluid Capacity | 6 gal (22 l) |
| Operating Voltage | 24 volts |
| Std Operation Weight – Front Axle | 10,360 lbs (4,699 kg) |
| Std Operation Weight – Rear Axle | 24,470 lbs (11,099 kg) |
| Std Operation Weight – Total | 34,830 lbs (15,799 kg) |
| Tandem Case Fluid Capacity (each) | 26 gal (100 l) |
| Tire Size | 14:00 x 24, G-2 |
| Transmission Fluid Capacity | 16 gal (61 l) |
Steering System
| Articulation Angle | 50 degrees |
| Turning Radius | 24 ft (7 m) |
Transmission
| Max Speed – Forward | 28 mph (46 kph) |
| Max Speed – Reverse | 20 mph (32 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | HTE 840, Fully sequential, direct drive, volvo powershift transmission |
