Contents
Circle
| Blade Tip Angle – Front | 46 degrees |
| Blade Tip Angle – Rear | 13 degrees |
| Diameter | 64 in (163 cm) |
| Max Reach Outside Tires – Left | 89 in (226 cm) |
| Max Reach Outside Tires – Right | 89 in (226 cm) |
| Rotation | 360 degrees |
| Shift Left | 30 in (76 cm) |
| Shift Right | 30 in (75 cm) |
Dimensions
| Blade Base | 10 ft (3 m) |
| Height to Top of Isomount Cab | 11 ft (3 m) |
| Overall Length | 32 ft (10 m) |
| Wheelbase | 22 ft (7 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Aspiration | Turbocharged, Aftercooled |
| Displacement | 573 cu in (9,390 cu cm) |
| Engine Model | D9B |
| Max Power | 277 hp (207 kw) |
| Net Power Gears 7-8 | 277 hp (207 kw) |
| Net Torque Gears 7-8 | 929 lbs ft (1,260 nm) |
| Number of Cylinders | 6 |
| Power Measured @ | 1700 rpm |
| Torque Measured @ | 1550 rpm |
Front Axle
| Ground Clearance | 24 ft (7 m) |
| Oscillation – Total | 16 degrees |
| Wheel Lean | 18 degrees |
Hydraulic System
| Pump Flow | 55 gpm (208 lpm) |
| Pump Type | Axial piston pump |
| Relief Valve Pressure | 3000 psi |
Moldboard
| Blade Down Pressure | 24,457 lbs (11,094 kg) |
| Blade Pull at Max Weight | 37,800 lbs (17,146 kg) |
| Max Depth of Cut | 33 in (83 cm) |
| Moldboard Height | 31 in (79 cm) |
| Moldboard Thickness | 1 in (3 cm) |
| Moldboard Width | 14 ft (4 m) |
| Side Shift Left | 27 in (67 cm) |
| Side Shift Right | 27 in (67 cm) |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Cooling System Fluid Capacity | 12 gal (47 l) |
| Fuel Capacity | 132 gal (500 l) |
| Hydraulic System Fluid Capacity | 24 gal (91 l) |
| Max Operation Weight – Front Axle | 18,500 lbs (8,391 kg) |
| Max Operation Weight – Rear Axle | 42,000 lbs (19,051 kg) |
| Max Operation Weight – Total | 60,000 lbs (27,216 kg) |
| Oil System Fluid Capacity | 10 gal (39 l) |
| Operating Voltage | 24 volts |
| Std Operation Weight – Front Axle | 13,670 lbs (6,201 kg) |
| Std Operation Weight – Rear Axle | 35,050 lbs (15,898 kg) |
| Std Operation Weight – Total | 48,720 lbs (22,099 kg) |
| Tandem Case Fluid Capacity (each) | 28 gal (105 l) |
| Tire Size | 16:00 x 24, G-2 |
| Transmission Fluid Capacity | 16 gal (61 l) |
Steering System
| Articulation Angle | 21 degrees |
| Turning Radius | 27 ft (8 m) |
Transmission
| Max Speed – Forward | 28 mph (45 kph) |
| Max Speed – Reverse | 20 mph (32 kph) |
| Number of Gears – Forward | 8 |
| Number of Gears – Reverse | 4 |
| Transmission Type | HTE 840, Fully sequential, direct drive, Volvo powershift transmission |
