Contents
Cab
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 9 in (24 cm) |
| Bucket Pin Height – Maximum Lift | 9 ft (3 m) |
| Bumper Overhang – Rear Axle | 38 in (97 cm) |
| Clearance at Max Lift and Dump | 7 ft (2 m) |
| Clearance at Maximum Lift and Dump | 85 in (216 cm) |
| Departure Angle | 26 degrees |
| Ground Clearance | 8 in (20 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – With Bucket on Ground | 127 in (323 cm) |
| Length – Without Bucket | 99 in (251 cm) |
| Length w/o Bucket | 8 ft (3 m) |
| Length with Bucket | 11 ft (3 m) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 146 in (371 cm) |
| Maximum Reach – With Arms Parallel | 50 in (128 cm) |
| Rack Back Angle – Maximum Height | 96.7 degrees |
| Reach – Maximum Lift/Dump | 20 in (51 cm) |
| Reach at Max Lift and Dump | 20 in (51 cm) |
| Turn Radius from Center – Bucket | 76 in (194 cm) |
| Turn Radius from Center – Coupler | 47 in (120 cm) |
| Turn Radius from Center – Rear | 59 in (149 cm) |
| Turning Radius from Center – inc bucket | 76 in (194 cm) |
| Turning Radius from Center – machine rear | 59 in (149 cm) |
| Vehicle Width over Tires | 60 in (152 cm) |
| Wheel Base | 3 ft (1 m) |
| Wheelbase | 3 ft (1 m) |
| Width Over Tires | 5 ft (2 m) |
Engine
| Bore | 3 in (8 cm) |
| Displacement | 134 cu in (2,196 cu cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat C2.2 T |
| Gross Power – SAE J1995 | 61 hp (45 kw) |
| Net Flywheel Power | 56 hp (42 kw) |
| Net Power – SAE 1349 | 56 hp (42 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2600 rpm |
| Stroke | 4 in (10 cm) |
Hydraulic System
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow |
| Hydraulic Power | 30 hp (23 kw) |
| Loader Hydraulic Flow | 16 gpm (59 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Maximum Loader Hydraulic Flow | 26 gpm (98 lpm) |
| Maximum Loader Hydraulic Pressure | 3335 psi |
| Pump Flow Capacity | 16 gpm (59 lpm) |
| Relief Valve Pressure | 3335 psi |
Loader
| Breakout Force | 4083 psi |
| Bucket Capacity | 0 cu yd (0 cu m) |
| Operating Load Rating | 1,500 lbs (680 kg) |
| Tipping Angle | 3000 degrees |
Operating Specifications
| Alternator Supplied Amperage | 85 amps |
| Breakout Force – Tilt Cylinder | 4,083 lbs (1,852 kg) |
| Chain Box Fluid Capacity – each side | 2 gal (6 l) |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 15 gal (58 l) |
| Hydraulic System Fluid Capacity | 15 gal (55 l) |
| Max Speed | 8 mph (13 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 5,822 lbs (2,641 kg) |
| Rated Operating Capacity | 1,500 lbs (680 kg) |
| Rated Operating Capacity with Optional Counterweight | 1,600 lbs (726 kg) |
| Tipping Load | 3,000 lbs (1,361 kg) |
Power Train
| Travel Speed Forward | 8 mph (13 kph) |
| Travel Speed Reverse | 8 mph (13 kph) |
Service Refill Capacities
| Chain Box – Each Side | 2 gal (6 l) |
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 15 gal (58 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 9 gal (35 l) |
Weights
| Operating Weight | 5,822 lbs (2,641 kg) |
