Contents
Cab
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 10 in (25 cm) |
| Bucket Pin Height – Maximum Lift | 10 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 285 in (724 cm) |
| Bumper Overhang – Rear Axle | 39 in (99 cm) |
| Clearance at Max Lift and Dump | 7 ft (2 m) |
| Clearance at Maximum Lift and Dump | 88 in (224 cm) |
| Departure Angle | 28 degrees |
| Ground Clearance | 6 in (14 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – With Bucket on Ground | 135 in (343 cm) |
| Length – Without Bucket | 109 in (276 cm) |
| Length w/o Bucket | 9 ft (3 m) |
| Length with Bucket | 11 ft (3 m) |
| Maximum Dump Angle | 50 degrees |
| Maximum Overall Height | 153 in (389 cm) |
| Maximum Reach – With Arms Parallel | 48 in (123 cm) |
| Rack Back Angle – Maximum Height | 86.9 degrees |
| Reach – Maximum Lift/Dump | 30 in (76 cm) |
| Reach at Max Lift and Dump | 30 in (76 cm) |
| Turn Radius from Center – Bucket | 87 in (222 cm) |
| Turn Radius from Center – Coupler | 57 in (144 cm) |
| Turn Radius from Center – Rear | 61 in (154 cm) |
| Turning Radius from Center – inc bucket | 87 in (222 cm) |
| Turning Radius from Center – machine rear | 61 in (154 cm) |
| Vehicle Width over Tires | 60 in (152 cm) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
| Width Over Tires | 5 ft (2 m) |
Engine
| Bore | 3 in (8 cm) |
| Displacement | 134 cu in (2,196 cu cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat C2.2 T |
| Gross Power – SAE J1995 | 61 hp (45 kw) |
| Net Flywheel Power | 56 hp (42 kw) |
| Net Power – SAE 1349 | 56 hp (42 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2600 rpm |
| Stroke | 4 in (10 cm) |
Hydraulic System
| Hydraulic Flow | Standard |
| Hydraulic Power | 30 hp (23 kw) |
| Loader Hydraulic Flow | 16 gpm (59 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Pump Flow Capacity | 16 gpm (59 lpm) |
| Relief Valve Pressure | 3335 psi |
Loader
| Breakout Force | 4060 psi |
| Bucket Capacity | 1 cu yd (0 cu m) |
| Operating Load Rating | 1,900 lbs (862 kg) |
| Tipping Angle | 3956 degrees |
Operating Specifications
| Alternator Supplied Amperage | 65 amps |
| Breakout Force – Tilt Cylinder | 4,060 lbs (1,842 kg) |
| Chain Box Fluid Capacity – each side | 2 gal (6 l) |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 15 gal (58 l) |
| Hydraulic System Fluid Capacity | 15 gal (55 l) |
| Max Speed | 7 mph (11 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 6,737 lbs (3,056 kg) |
| Rated Operating Capacity | 1,900 lbs (862 kg) |
| Rated Operating Capacity with Optional Counterweight | 1,945 lbs (882 kg) |
| Tipping Load | 3,956 lbs (1,794 kg) |
Power Train
| Travel Speed Forward | 7 mph (11 kph) |
| Travel Speed Reverse | 7 mph (11 kph) |
Service Refill Capacities
| Chain Box – Each Side | 2 gal (6 l) |
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 15 gal (58 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 9 gal (35 l) |
Weights
| Operating Weight | 6,737 lbs (3,056 kg) |
