Contents
Cab
| FOPS | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| FOPS Level II | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
| ROPS | SAE J1040 MAY94 and ISO3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 10 in (25 cm) |
| Bucket Pin Height – Maximum Lift | 10 ft (3 m) |
| Bumper Overhang – Rear Axle | 39 in (99 cm) |
| Clearance at Max Lift and Dump | 7 ft (2 m) |
| Clearance at Maximum Lift and Dump | 88 in (224 cm) |
| Ground Clearance | 6 in (15 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Length – With Bucket on Ground | 135 in (343 cm) |
| Length – Without Bucket | 109 in (277 cm) |
| Length w/o Bucket | 9 ft (3 m) |
| Length with Bucket | 11 ft (3 m) |
| Maximum Overall Height | 153 in (389 cm) |
| Maximum Reach – With Arms Parallel | 48 in (123 cm) |
| Reach – Maximum Lift/Dump | 30 in (76 cm) |
| Reach at Max Lift and Dump | 30 in (77 cm) |
| Turn Radius from Center – Bucket | 87 in (222 cm) |
| Turn Radius from Center – Coupler | 57 in (144 cm) |
| Turn Radius from Center – Rear | 61 in (154 cm) |
| Turning Radius from Center – inc bucket | 88 in (222 cm) |
| Turning Radius from Center – machine rear | 61 in (155 cm) |
| Vehicle Width over Tires | 60 in (152 cm) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
| Width Over Tires | 5 ft (2 m) |
Engine
| Bore | 3 in (8 cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat 3024C |
| Engine Power – ISO 14396 | 51 hp (38 kw) |
| Gross Power – SAE J1995 | 52 hp (39 kw) |
| Net Flywheel Power | 49 hp (37 kw) |
| Net Power – EEC 80/1269 | 50 hp (37 kw) |
| Net Power – ISO 9249 EEC | 50 hp (37 kw) |
| Net Power – SAE 1349 | 49 hp (37 kw) |
| Stroke | 4 in (10 cm) |
Hydraulic System
| Hydraulic Flow (1) | Standard flow |
| Hydraulic Flow (2) | Standard |
| Hydraulic Power | 28 hp (21 kw) |
| Loader Hydraulic Flow | 16 gpm (59 lpm) |
| Loader Hydraulic Pressure | 3100 psi |
| Pump Flow Capacity | 16 gpm (60 lpm) |
| Relief Valve Pressure | 3103.9 psi |
Loader
| Breakout Force | 4058.8 psi |
| Operating Load Rating | 1,748 lbs (793 kg) |
| Tipping Angle | 3501 degrees |
Operating Specifications
| Alternator Supplied Amperage | 65 amps |
| Breakout Force – Lift Cylinder | 3,841 lbs (1,742 kg) |
| Breakout Force – Tilt Cylinder | 4,059 lbs (1,841 kg) |
| Chain Box Fluid Capacity – each side | 2 gal (6 l) |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Fluid Capacity | 2 gal (8 l) |
| Fuel Capacity | 17 gal (65 l) |
| Hydraulic System Fluid Capacity | 15 gal (55 l) |
| Max Speed | 7 mph (11 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 6,660 lbs (3,021 kg) |
| Rated Operating Capacity | 1,750 lbs (794 kg) |
| Rated Operating Capacity with Optional Counterweight | 1,795 lbs (814 kg) |
| Tipping Load | 3,955 lbs (1,794 kg) |
| Tire Size | 10×16.5 8PR |
Power Train
| Travel Speed Forward | 7 mph (11 kph) |
| Travel Speed Reverse | 7 mph (11 kph) |
Service Refill Capacities
| Chain Box – Each Side | 2 gal (6 l) |
| Cooling System | 3 gal (10 l) |
| Engine Crankcase | 2 gal (8 l) |
| Fuel Tank | 17 gal (64 l) |
| Hydraulic System | 15 gal (55 l) |
| Hydraulic Tank | 9 gal (35 l) |
Weights
| Operating Weight | 6,661 lbs (3,021 kg) |
