Contents
Cab
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level II | SAE J231 JAN81, ISO 3449:1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
Dimensions
| Bucket Pin Height – Carry Position | 8 in (20 cm) |
| Bucket Pin Height – Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach – Maximum Lift | 16 in (41 cm) |
| Bumper Overhang – Rear Axle | 43 in (108 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 95 in (242 cm) |
| Departure Angle | 25 degrees |
| Ground Clearance | 9 in (23 cm) |
| Height – Top of Cab | 7 ft (2 m) |
| Hinge pin height – fully raised | 127 in (322 cm) |
| Length – With Bucket on Ground | 152 in (385 cm) |
| Length – Without Bucket | 124 in (314 cm) |
| Length w/o Bucket | 10 ft (3 m) |
| Length with Bucket | 13 ft (4 m) |
| Maximum Dump Angle | 52 degrees |
| Maximum Overall Height | 159 in (405 cm) |
| Maximum Reach – With Arms Parallel | 51 in (129 cm) |
| Rack Back Angle – Maximum Height | 83 degrees |
| Reach – Maximum Lift/Dump | 31 in (78 cm) |
| Reach at Max Lift and Dump | 31 in (79 cm) |
| Turn Radius from Center – Bucket | 92 in (232 cm) |
| Turn Radius from Center – Coupler | 59 in (150 cm) |
| Turn Radius from Center – Rear | 74 in (187 cm) |
| Turning Radius from Center – machine rear | 74 in (187 cm) |
| Vehicle Width over Tires | 76 in (193 cm) |
| Wheel Base | 5 ft (1 m) |
| Wheelbase | 5 ft (1 m) |
| Width Over Tires | 6 ft (2 m) |
Engine
| Bore | 4 in (10 cm) |
| Displacement | 232 cu in (3,802 cu cm) |
| Engine Model | Cat C3.8 (turbocharged) |
| Gross Power – SAE J1995 | 98 hp (73 kw) |
| Net Flywheel Power | 95 hp (71 kw) |
| Net Power – ISO 9249 EEC | 95 hp (71 kw) |
| Net Power – SAE 1349 | 95 hp (71 kw) |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow XPS |
| Loader Hydraulic Flow | 23 gpm (87 lpm) |
| Loader Hydraulic Pressure | 3335 psi |
| Maximum Loader Hydraulic Flow | 32 gpm (121 lpm) |
| Maximum Loader Hydraulic Pressure | 4061 psi |
Loader
| Operating Load Rating | 3,200 lbs (1,451 kg) |
| Operating Width | 72 in (183 cm) |
| Tipping load (ISO 14397) | 6,400 lbs (2,903 kg) |
Operating Specifications
| Alternator Supplied Amperage | 100 amps |
| Breakout Force – Lift Cylinder | 6,100 lbs (2,767 kg) |
| Breakout Force – Tilt Cylinder | 7,405 lbs (3,359 kg) |
| Chain Box Fluid Capacity – each side | 2 gal (9 l) |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 31 gal (117 l) |
| Hydraulic System Fluid Capacity | 16 gal (61 l) |
| Max Speed | 7 mph (11 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 18,528 lbs (8,404 kg) |
| Rated Operating Capacity | 3,200 lbs (1,451 kg) |
| Rated Operating Capacity with Optional Counterweight | 3,450 lbs (1,565 kg) |
| Tipping Load | 6,400 lbs (2,903 kg) |
| Tire Size | 14 x 17.5 |
Power Train
| Travel Speed Forward | 7 mph (11 kph) |
| Travel Speed Forward – 2-Speed Option | 9 mph (15 kph) |
| Travel Speed Reverse | 7 mph (11 kph) |
| Travel Speed Reverse – 2-Speed Option | 9 mph (15 kph) |
Service Refill Capacities
| Chain Box – Each Side | 2 gal (9 l) |
| Cooling System | 4 gal (14 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 31 gal (117 l) |
| Hydraulic System | 16 gal (61 l) |
| Hydraulic Tank | 10 gal (39 l) |
Weights
| Operating Weight | 8,404 lbs (3,812 kg) |
