Contents
3-Point Hitch
| Category | Limited Category 1 |
| Lift capacity (24-in. behind link arms) | 400 kg (882 lbs) |
Dimensions
| Front Axle Clearance | 13 in (32 cm) |
| Limited slip differential | No |
| Shipping weight | 814 kg (1,793 lbs) |
| Turning radius without brakes | 9 ft (3 m) |
| Wheelbase | 63 ft (19 m) |
Electrical System
| Alternator (12-V) | 40 amp |
| Battery size | 500 CCA |
| Starter size | 2 hp (1 kw) |
Engine
| Air cleaner | Dual element |
| Aspiration | Natural |
| Bore | 3 in (8 cm) |
| Compression ratio | .95 |
| Cooling system | Water pump |
| Cylinder liners | Cast-In-Block |
| Displacement | 77 cu in (1,268 cu cm) |
| Emissions compliance | Final Tier 4 |
| Engine Manufacturer | Yanmar |
| Engine Model | 3TNV80F-NCJT |
| Engine torque at rated speed | 53 Nm |
| Engine Type | Diesel |
| Family | GYDXL1.27NS1, HYDXL1.27NS1 |
| Fuel tank capacity | 6 gal (24 l) |
| Gross Power | 24 hp (18 kw) |
| Injection pump type | Indirect Injection |
| Lubrication | Pressurized |
| Number of Cylinders | 3 |
| Power take-off (PTO) power | 18 hp (13 kw) |
| Rated engine speed | 3200 rpm |
| Stroke | 3 in (9 cm) |
Final Drive
| Differential lock | Yes |
| Final Drive Type | Spur Gear |
Fluid Capacities
| Crankcase with filter | 2.7 L |
Fuel System
| Fuel consumption | 2 gph (6 lph) |
| Fuel System Type | Indirect Injection |
Hydraulic System
| Draft control sensing | Position control |
| Hydraulic Type | Open Center |
| Maximum operating pressure | 2150 psi |
| Pump rated output | Steering 13.25 L/min 3.5 gpm, Implement 13.25 L/min, 3.5 gpm, 26.5 L/min , 7.0 gpm |
| Pump Type | Gear |
| Remote control valves available | 2 |
Operator Station
| Gear shift location – console/floor | Left Hand Side |
| Platform – flat/straddle | Three-piece semi flat |
| Rollover protective structure | Type Foldable OSHA, SAE, ASAE |
Power Take-Off (PTO)
| Brake (for mid and rear PTO) | Wet disc |
| Clutch | Wet disc |
| Control | Independent |
| Standard | Rear – 540 rpm, Mid – 2100 rpm |
Tires
| Front Tires Size | R3 Turf – 23×8.50-12, R4 Industrial – 23×8.50-12, R3 Radial – 220/55-R12 |
| Front tread range | 95 cm (38 in) |
| Rear Tires Size | R3 Turf – 31×13.5-15, R4 Industrial – 12-16.5, R3 Radial – 280/70-R16 |
Transmission
| Axle capacity | Front – 612 kg, Rear – 1100 kg |
| Brakes | Wet disc |
| Creeper | No |
| Cruise control | Standard |
| Differential lock | Yes |
| Final Drive Type | Spur Gear |
| Left-hand reverser | No |
| Standard transmission, forward/reverse | Hydrostatic – 2 range |
| Steering | Power steering |
