Contents
3-Point Hitch
| Category | Category 1 |
| Lift capacity (24-in. behind link arms) | 615 kg (1,356 lbs) |
Dimensions
| Shipping weight | 1,105 kg (2,436 lbs) |
| Turning radius with brakes | 3 m (9 ft) |
| Turning radius without brakes | 10 ft (3 m) |
| Wheelbase | 68 ft (21 m) |
Electrical System
| Alternator (12-V) | 85 amp |
| Battery size | 500 CCA |
| Starter size | 2 hp (1 kw) |
Engine
| Air cleaner | Dual element |
| Aspiration | Turbocharged |
| Bore | 3 in (9 cm) |
| Compression ratio | 19.1:1 |
| Cooling system | Water pump |
| Cylinder liners | Cast-In-Block |
| Displacement | 96 cu in (1,568 cu cm) |
| Emissions compliance | Final Tier 4 |
| Engine Manufacturer | Yanmar |
| Engine Model | 3TNV88C-NJT |
| Engine torque at rated speed | 101.4 Nm |
| Engine Type | Direct Injection |
| Family | GYDXL1.57TDA |
| Fuel tank capacity | 9 gal (32 l) |
| Gross Power | 37 hp (27 kw) |
| Injection pump type | Direct Injection |
| Lubrication | Pressurized |
| Number of Cylinders | 3 |
| Power take-off (PTO) power | 30 hp (23 kw) |
| Rated engine speed | 2500 rpm |
| Stroke | 4 in (9 cm) |
Final Drive
| Differential lock | Yes |
| Final Drive Type | Spur Gear |
Fluid Capacities
| Crankcase with filter | 4.5 L |
Fuel System
| Fuel System Type | Direct Injection |
Hydraulic System
| Draft control sensing | Position control |
| Hydraulic Type | Open Center |
| Maximum operating pressure | 2500 psi |
| Pump rated output | Steering – 15 L/min, Implement – 20.2 L/min |
| Pump Type | Gear |
| Remote control valves available | Up to three |
Operator Station
| Gear shift location – console/floor | Left Hand Side |
| Platform – flat/straddle | Flat |
| Rollover protective structure | Foldable, ASABE S478 |
Power Take-Off (PTO)
| Brake (for mid and rear PTO) | Wet disc |
| Clutch | Independent |
| Control | Independent |
| Standard | Rear – 540 rpm, Mid – 2000 rpm |
Tires
| Front Tires Size | R1 Ag 7.00-12, R3 Turf 23×8.50-14, R4 Industrial 23×8.50-14, R3 Turf Radial 200/60 R15 |
| Rear Tires Size | R1 Ag 12.4-16 R3 Turf 14-17.5, R4 Industrial 14-17.5, R3 Turf Radial 300/70 R20 |
Transmission
| Axle capacity | Front – 880 kg, Rear – 1089 kg |
| Brakes | Wet disc |
| Creeper | No |
| Cruise control | Standard |
| Differential lock | Yes |
| Final Drive Type | Bull Gear |
| Standard transmission, forward/reverse | Hydrostatic transmission (HST) |
| Steering | Power steering |
