Contents
Bucket
| Breakout Force | 10,340 lbs (4,690 kg) |
| Bucket Capacity – heaped | 1 cu yd (1 cu m) |
| Bucket Width | 6 ft (2 m) |
| Dump Clearance at Max Raise | 8 ft (2 m) |
Cab
| FOPS | meets the following criteria: SAE J231 JAN81, ISO 3449:1992 |
| ROPS | meets the following criteria: SAE J1040 MAY94, ISO 3471-1:1986 |
Dimensions
| Height – Top of Cab | 9 ft (3 m) |
| Hinge Pin – Max Height | 10 ft (3 m) |
| Length with Bucket on Ground | 17 ft (5 m) |
| Reach at Max Lift and Dump | 3 ft (1 m) |
| Tread Width | 55 in (140 cm) |
| Wheelbase | 7 ft (2 m) |
| Width Over Tires | 6 ft (2 m) |
Engine
| Bore | 4 in (9 cm) |
| EEC 80/1269 Rating | 71 hp (53 kw) |
| Engine Model | 3044C |
| Gross Power | 75 hp (56 kw) |
| ISO 9249 Rating | 71 hp (53 kw) |
| Net Power | 68 hp (51 kw) |
| Power Measured @ | 2600 rpm |
| SAE J1349 Rating | 71 hp (53 kw) |
| Stroke | 5 in (12 cm) |
Hydraulic System
| 3rd Valve Flow | 18 gpm (67 lpm) |
| Dump Time | 1.5 seconds |
| Lower Time | 3.2 seconds |
| Main Relief | 3400 psi |
| Pump Flow Capacity | 18 gpm (68 lpm) |
| Pump Type | Gear |
| Raise Time | 4.5 seconds |
| Relief Valve Setting | 3408.4 psi |
Operating Specifications
| Alternator Supplied Amperage | 90 amps |
| Articulation | 40 degrees |
| Breakout Force | 10,340 lbs (4,690 kg) |
| Cooling System Fluid Capacity | 6 gal (21 l) |
| Dump Height at Full Lift | 8 ft (2 m) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 20 gal (74 l) |
| Full Turn Static Tipping Load – Bucket | 6,666 lbs (3,024 kg) |
| Full Turn Static Tipping Load – Forks | 5500 lb |
| Hydraulic Lift Capacity | 9,100 lbs (4,128 kg) |
| Hydraulic System Fluid Capacity | 18 gal (66 l) |
| Operating Voltage | 12 volts |
| Operating Weight | 10,912 lbs (4,950 kg) |
| Oscillation +/- | 11 degrees |
| Rack Back – Transport Position | 53 degrees |
| Rated Bucket Capacity | 1 cu yd (1 cu m) |
| Rated Operating Load at Full Turn – Bucket | 3,333 lbs (1,512 kg) |
| Rated Operating Load at Full Turn – Forks | 4433 lb |
| Reach – Without Teeth | 3 ft (1 m) |
| Rear Axle Oscillation | 22 degrees |
| Static Tipping Weight | 7,546 lbs (3,423 kg) |
| Straight Tipping Load – Bucket | 7,546 lbs (3,423 kg) |
| Tire Size | 12.5×18 |
| Transmission Fluid Capacity | 3 gal (10 l) |
Power Train, Axles and Brakes
| Axle and Final Drives | fixed front axle with limited slip differential and planetary ge |
| Brake Standards | Brake meets ISO 3450:1996 |
| Maximum Travel Speeds – Forward and Reverse, High | 12 mph (19 kph) |
| Maximum Travel Speeds – With 12.5-18 Tires, Forward and Reverse, Low | 4 mph (6 kph) |
| Service and Parking Brake | Are combined in a single, dry-disc driveline brake |
| Transmission Type | Closed-loop, two-speed hydrostatic single-path transmission. |
Service Refill Capacities
| Cooling System | 6 gal (21 l) |
| Engine Oil | 3 gal (10 l) |
| Fuel Tank | 20 gal (74 l) |
| Hydraulic System | 18 gal (66 l) |
Transmission
| Max Speed – Forward | 12 mph (19 kph) |
| Max Speed – Reverse | 12 mph (19 kph) |
| Number of Forward Gears | 2 |
| Number of Reverse Gears | 2 |
| Transmission Type | Hydrostatic |
Weights
| Operating Weight | 10,912 lbs (4,950 kg) |
