Contents
Axles
| Front | Fixed front |
| Maximum Single-Wheel Rise and Fall | 20 in (50 cm) |
| Rear | Oscillating +/- 13? |
Brakes
| Brakes | Meets required standards. |
Bucket
| Breakout Force | 51,750 lbs (23,473 kg) |
| Bucket Capacities | 6 cu yd (5 cu m) |
| Bucket Capacity – heaped | 6 cu yd (5 cu m) |
| Bucket Capacity – struck | 5 cu yd (4 cu m) |
| Bucket Width | 10 ft (3 m) |
| Dump Clearance at Max Raise | 11 ft (3 m) |
| Maximum Bucket Capacity | 6 cu yd (5 cu m) |
Cab
| ROPS/FOPS | Meets SAE and ISO standards. |
Dimensions
| B-Pin Height – Standard | 15 ft (4 m) |
| Centerline of Rear Axle to Hitch | 68 in (173 cm) |
| Centerline Rear Axle to Edge of Counterweight | 8 ft (2 m) |
| Ground Clearance | 2 ft (1 m) |
| Height – Top of Cab | 12 ft (4 m) |
| Height – Top of Exhaust | 140 in (356 cm) |
| Height – Top of Hood | 106 in (268 cm) |
| Height – Top of ROPS/FOPS | 12 ft (4 m) |
| Hinge Pin – Max Height | 15 ft (4 m) |
| Length with Bucket on Ground | 30 ft (9 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheel Base | 11 ft (3 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 10 ft (3 m) |
Engine
| Bore | 5 in (13 cm) |
| Displacement | 763 cu in (12,500 cu cm) |
| Engine Model | Cat C13 ACERT |
| Flywheel Power | 287 hp (214 kw) |
| Gross Power | 311 hp (232 kw) |
| Gross Power – SAE J1995 | 311 hp (232 kw) |
| Make | Cat |
| Model | C13 |
| Net Power | 287 hp (214 kw) |
| Net Power – 80/1269/EEC | 287 hp (214 kw) |
| Net Power – ISO 9249 | 287 hp (214 kw) |
| Net Power – SAE J1349 | 284 hp (212 kw) |
| Peak Torque – 1,400 rpm – Net | 983 lbs ft (1,333 nm) |
| Power Measured @ | 1800 rpm |
| Stroke | 6 in (16 cm) |
| Torque Measured @ | 1400 rpm |
Hydraulic System
| Bucket/Work Tool System – Pump Output | 81 gpm (305 lpm) |
| Dump Time | 2.1 seconds |
| Hydraulic Cycle Time – Dump | 2.1 seconds |
| Hydraulic Cycle Time – Lower, Empty, Float Down | 2.4 seconds |
| Hydraulic Cycle Time – Raise | 5.9 seconds |
| Hydraulic Cycle Time – Total | 10.4 seconds |
| Lower Time | 2.4 seconds |
| Pump Flow Capacity | 81 gpm (305 lpm) |
| Pump Type | Piston |
| Raise Time | 5.9 seconds |
| Relief Valve Setting | 1000 psi |
| Steering System – Pump Type | Piston |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Breakout Force | 51,750 lbs (23,473 kg) |
| Cooling System Fluid Capacity | 10 gal (39 l) |
| Dump Clearance | 10,358 ft (3,157 m) |
| Engine Oil Fluid Capacity | 9 gal (35 l) |
| Front Axle/Diff Fluid Capacity | 17 gal (64 l) |
| Fuel Capacity | 100 gal (380 l) |
| Hydraulic System Fluid Capacity | 29 gal (110 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 55,451 lbs (25,152 kg) |
| Rated Bucket Capacity | 6 cu yd (5 cu m) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 17 gal (64 l) |
| Static Tipping Load – Full Turn | 37,271 lbs (16,906 kg) |
| Static Tipping Weight | 42,043 lbs (19,070 kg) |
| Tire Size | 26.5-25 |
| Transmission Fluid Capacity | 9 gal (35 l) |
| Turning Radius | 24 ft (7 m) |
Service Refill Capacities
| Cooling System | 10 gal (39 l) |
| Crankcase | 9 gal (35 l) |
| Differential – Final Drives – Front | 17 gal (64 l) |
| Differential – Final Drives – Rear | 17 gal (64 l) |
| Fuel Tank – Standard | 100 gal (380 l) |
| Hydraulic Tank | 29 gal (110 l) |
| Transmission | 9 gal (35 l) |
Tires
| Tires | Choose from a variety of tires to match your application. |
Transmission
| Forward – 1 | 5 mph (7 kph) |
| Forward – 2 | 8 mph (13 kph) |
| Forward – 3 | 13 mph (21 kph) |
| Forward – 4 | 23 mph (37 kph) |
| Max Speed – Forward | 23 mph (37 kph) |
| Max Speed – Reverse | 24 mph (39 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Reverse – 1 | 5 mph (8 kph) |
| Reverse – 2 | 9 mph (14 kph) |
| Reverse – 3 | 15 mph (24 kph) |
| Reverse – 4 | 24 mph (39 kph) |
| Transmission Type | Powershift |
Weights
| Operating Weight | 55,451 lbs (25,152 kg) |
| Operational Weight | 54,908 lbs (24,906 kg) |
