Contents
Axles
| Front | Fixed front |
| Maximum Single-Wheel Rise and Fall | 22 in (55 cm) |
| Rear | Oscillating +/- 13? |
Brakes
| Brakes | Meets required standards. |
Bucket
| Breakout Force | 61,425 lbs (27,862 kg) |
| Breakout Force – Reference Bucket | 61,373 lbs (27,838 kg) |
| Bucket Capacities | 8 yd (7 m) |
| Bucket Capacity – heaped | 6 cu yd (4 cu m) |
| Bucket Capacity – struck | 5 cu yd (4 cu m) |
| Bucket Width | 12 ft (4 m) |
| Dump Clearance at Max Raise | 11 ft (3 m) |
| Maximum Bucket Capacity | 8 cu yd (6 cu m) |
| Reference Bucket Capacity | 6 cu yd (4 cu m) |
| Type – Reference bucket | General purpose with Teeth |
Cab
| ROPS/FOPS | Meets SAE and ISO standards. |
Dimensions
| B-Pin Height – Standard | 15 ft (5 m) |
| Centerline of Rear Axle to Hitch | 73 in (185 cm) |
| Centerline Rear Axle to Edge of Counterweight | 8 ft (2 m) |
| Ground Clearance | 2 ft (0 m) |
| Height – Top of Cab | 12 ft (4 m) |
| Height – Top of Exhaust | 146 in (372 cm) |
| Height – Top of Hood | 107 in (272 cm) |
| Height – Top of ROPS/FOPS | 12 ft (4 m) |
| Hinge Pin – Max Height | 15 ft (5 m) |
| Length with Bucket on Ground | 31 ft (9 m) |
| Reach at Max Lift and Dump | 5 ft (2 m) |
| Wheel Base | 12 ft (4 m) |
| Wheelbase | 12 ft (4 m) |
| Width Over Tires | 11 ft (3 m) |
Engine
| Bore | 5 in (14 cm) |
| Displacement | 928 cu in (15,207 cu cm) |
| Engine Model | Cat C15 ACERT |
| Gross Power | 355 hp (265 kw) |
| Gross Power – SAE J1995 | 393 hp (293 kw) |
| Make | Cat |
| Model | C15 |
| Net Power | 318 hp (237 kw) |
| Net Power – 80/1269/EEC | 353 hp (263 kw) |
| Net Power – ISO 9249 | 349 hp (260 kw) |
| Net Power – SAE J1349 | 349 hp (260 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1800 rpm |
| Stroke | 7 in (17 cm) |
Hydraulic System
| Bucket/Work Tool System – Pump Output | 123 gpm (466 lpm) |
| Dump Time | 2.1 seconds |
| Hydraulic Cycle Time – Dump | 2.1 seconds |
| Hydraulic Cycle Time – Lower, Empty, Float Down | 3.4 seconds |
| Hydraulic Cycle Time – Raise | 6 seconds |
| Hydraulic Cycle Time – Total | 11.5 seconds |
| Lower Time | 3.4 seconds |
| Pump Flow Capacity | 123 gpm (466 lpm) |
| Pump Type | Gear |
| Raise Time | 6 seconds |
| Relief Valve Setting | 3000 psi |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Breakout Force | 44,775 lbs (20,310 kg) |
| Cooling System Fluid Capacity | 22 gal (83 l) |
| Dump Clearance | 10,843 ft (3,305 m) |
| Engine Oil Fluid Capacity | 10 gal (38 l) |
| Front Axle/Diff Fluid Capacity | 23 gal (87 l) |
| Fuel Capacity | 127 gal (481 l) |
| Hydraulic System Fluid Capacity | 66 gal (250 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 66,489 lbs (30,159 kg) |
| Rated Bucket Capacity | 5-8 cu yd (4-6 cu m) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 23 gal (87 l) |
| Static Tipping Load – Full Turn | 42,989 lbs (19,500 kg) |
| Static Tipping Weight | 50,201 lbs (22,771 kg) |
| Tire Size | 29.5-25 |
| Transmission Fluid Capacity | 16 gal (61 l) |
| Turning Radius | 26 ft (8 m) |
Service Refill Capacities
| Cooling System | 22 gal (83 l) |
| Crankcase | 17 gal (64 l) |
| Differential – Final Drives – Front | 23 gal (87 l) |
| Differential – Final Drives – Rear | 23 gal (87 l) |
| Fuel Tank – Standard | 127 gal (481 l) |
| Hydraulic Tank | 33 gal (125 l) |
| Transmission | 16 gal (61 l) |
Tires
| Tires | Choose from a variety of tires to match your application. |
Transmission
| Forward – 1 | 4 mph (7 kph) |
| Forward – 2 | 7 mph (12 kph) |
| Forward – 3 | 13 mph (21 kph) |
| Forward – 4 | 23 mph (36 kph) |
| Max Speed – Forward | 23 mph (36 kph) |
| Max Speed – Reverse | 26 mph (42 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Reverse – 1 | 5 mph (8 kph) |
| Reverse – 2 | 8 mph (14 kph) |
| Reverse – 3 | 15 mph (24 kph) |
| Reverse – 4 | 26 mph (42 kph) |
| Transmission Type | Powershift |
Weights
| Operating Weight | 67,294 lbs (30,524 kg) |
| Operational Weight | 68,489 lbs (31,066 kg) |
