Contents
Axles
| Front | Fixed front |
| Maximum Single-Wheel Rise and Fall | 19 in (47 cm) |
Brakes
| Brakes | Meets required standards. |
Bucket
| Breakout Force | 35,775 lbs (16,227 kg) |
| Bucket Capacities | 6 cu yd (4 cu m) |
| Bucket Capacity – heaped | 4 cu yd (3 cu m) |
| Bucket Capacity – struck | 4 cu yd (3 cu m) |
| Maximum Bucket Capacity | 6 cu yd (4 cu m) |
Dimensions
| Dump Clearance at Max Lift | 9 ft (3 m) |
| Fork Tine Length | 5 ft (2 m) |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 11 ft (3 m) |
| Height – Top of Hood | 97 in (246 cm) |
| Hinge Pin Max Height | 14 ft (4 m) |
| Hook Height at Max Lift – Extended | 25 ft (8 m) |
| Hook Height at Max Lift – Standard | 21 ft (6 m) |
| Hook Reach at Max Lift – Extended | 10 ft (3 m) |
| Hook Reach at Max Lift – Standard | 7 ft (2 m) |
| Length w/ Bucket on Ground | 28 ft (9 m) |
| Length with out Forks on Ground | 30 ft (9 m) |
| Max Lift Height | 13 ft (4 m) |
| Reach at Max Height and Dump | 4 ft (1 m) |
| Wheel Base | 11 ft (3 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Bore | 4 in (11 cm) |
| Displacement | 439 cu in (7,194 cu cm) |
| Engine Model | Cat C7 ACERT |
| Flywheel Power | 212 hp (158 kw) |
| Gross Power | 230 hp (172 kw) |
| Gross Power – SAE J1995 | 230 hp (172 kw) |
| Max Torque | 669 lbs ft (907 nm) |
| Net Power | 211 hp (157 kw) |
| Net Power – 80/1269/EEC | 211 hp (157 kw) |
| Net Power – ISO 9249 | 211 hp (157 kw) |
| Net Power – SAE J1349 | 209 hp (156 kw) |
| Peak Torque – 1,400 rpm – Net | 669 lbs ft (907 nm) |
| Stroke | 5 in (13 cm) |
Hydraulic System
| Dump Time | 2.1 seconds |
| Hydraulic Cycle Time – Dump | 2.1 seconds |
| Hydraulic Cycle Time – Lower, Empty, Float Down | 2.6 seconds |
| Hydraulic Cycle Time – Raise | 6 seconds |
| Hydraulic Cycle Time – Total | 10.7 seconds |
| Lower Time | 2.6 seconds |
| Pilot System – Pump Output | 71 gpm (270 lpm) |
| Pump Flow Capacity | 71 gpm (269 lpm) |
| Pump Type | Piston pump |
| Raise Time | 6 seconds |
| Steering System – Pump Type | Piston |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Breakout Force | 35,775 lbs (16,227 kg) |
| Cooling System Fluid Capacity | 11 gal (42 l) |
| Dump Clearance | 9,137 ft (2,785 m) |
| Engine Oil Capacity | 8 gal (30 l) |
| Front Diff Fluid Capacity | 10 gal (36 l) |
| Fuel Capacity | 83 gal (314 l) |
| Hydraulic System Fluid Capacity | 29 gal (110 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 42,770 lbs (19,400 kg) |
| Rear Axle Oscillation | 13 degrees |
| Rear Diff Fluid Capacity | 10 gal (36 l) |
| Static Tipping Load – Bucket | 29,602 lbs (13,427 kg) |
| Static Tipping Load – Forks | 20,667 lbs (9,374 kg) |
| Static Tipping Load – Full Turn | 25,860 lbs (11,730 kg) |
| Static Tipping Load – Material Handler | 16,163 lbs (7,331 kg) |
| Tire Size | 23.5R25 |
| Transmission Fluid Capacity | 9 gal (34 l) |
| Turning Radius | 22 ft (7 m) |
Service Refill Capacities
| Cooling System | 11 gal (42 l) |
| Crankcase | 8 gal (30 l) |
| Differential – Final Drives – Front | 10 gal (36 l) |
| Differential – Final Drives – Rear | 10 gal (36 l) |
| Fuel Tank – Standard | 83 gal (314 l) |
| Hydraulic Tank | 29 gal (110 l) |
| Transmission | 9 gal (34 l) |
Transmission
| Forward – 1 | 4 mph (7 kph) |
| Forward – 2 | 8 mph (13 kph) |
| Forward – 3 | 14 mph (23 kph) |
| Forward – 4 | 24 mph (38 kph) |
| Max Speed Forward | 24 mph (38 kph) |
| Max Speed Reverse | 25 mph (40 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Reverse – 1 | 5 mph (8 kph) |
| Reverse – 2 | 9 mph (14 kph) |
| Reverse – 3 | 15 mph (24 kph) |
| Transmission Type | Powershift |
Weights
| Operating Weight | 42,770 lbs (19,400 kg) |
