Bucket
| Breakout Force | 13,624 lbs (6,180 kg) |
| Bucket Capacity – heaped | 2 cu yd (2 cu m) |
| Bucket Capacity – struck | 2 cu yd (1 cu m) |
Dimensions
| Dump Clearance at Max Lift | 9 ft (3 m) |
| Fork Tine Length | 4 ft (1 m) |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 10 ft (3 m) |
| Height at Hook Max Reach | 5 ft (1 m) |
| Hinge Pin Max Height | 12 ft (4 m) |
| Hook Height at Max Lift – standard | 19 ft (6 m) |
| Length w/ Bucket on Ground | 21 ft (6 m) |
| Length with out Forks on Ground | 21 ft (6 m) |
| Max Lift Height | 12 ft (4 m) |
| Reach at Max Height and Dump | 4 ft (1 m) |
| Wheelbase | 9 ft (3 m) |
| Width Over Tires | 7 ft (2 m) |
Engine
| Aspiration | turbocharged |
| Displacement | 244 cu in (3,998 cu cm) |
| Engine Model | VME TD 40GA |
| Gross Power | 96 hp (72 kw) |
| Max Torque | 273 lbs ft (370 nm) |
| Net Power | 91 hp (68 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2200 rpm |
| Torque Measured @ | 1400 rpm |
Hydraulic System
| Dump Time | 1.1 seconds |
| Lower Time | 3.3 seconds |
| Pump Flow Capacity | 8 gpm (32 lpm) |
| Pump Type | load sensing axial flow piston |
| Raise Time | 4.4 seconds |
| Relief Valve Setting | 3771 psi |
Operating Specifications
| Alternator Supplied Amperage | 60 amps |
| Cooling System Fluid Capacity | 6 gal (22 l) |
| Engine Oil Capacity | 3 gal (11 l) |
| Front Diff Fluid Capacity | 6 gal (24 l) |
| Fuel Capacity | 45 gal (170 l) |
| Hydraulic System Fluid Capacity | 28 gal (106 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 17,860 lbs (8,101 kg) |
| Rear Axle Oscillation | 12 degrees |
| Rear Diff Fluid Capacity | 6 gal (24 l) |
| Static Tipping Load – Bucket | 10,803 lbs (4,900 kg) |
| Static Tipping Load – Forks | 14,595 lbs (6,620 kg) |
| Tire Size | 15.5R25 |
| Transmission Fluid Capacity | 2 gal (7 l) |
| Turning Radius | 18 ft (5 m) |
Transmission
| Max Speed Forward | 23 mph (36 kph) |
| Max Speed Reverse | 23 mph (36 kph) |
| Transmission Type | VME power shift |
