Contents
Blades
| Blade Capacity | 2 cu yd (2 cu m) |
| Blade Height | 33 in (84 cm) |
| Blade Type | PAT |
| Blade Width | 10 ft (3 m) |
Capacities
| Engine oil with filter | 3 gal (12 l) |
Dimensions
| Blade depth below ground | 21 in (53 cm) |
| Blade lift above ground | 34 in (85 cm) |
| Cast reach | 11 in (28 cm) |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 9 ft (3 m) |
| Height – Top of ROPS/FOPS | 104 in (264 cm) |
| Length of Track on Ground | 84 ft (26 m) |
| Width Over Tracks | 6 ft (2 m) |
Drive System
| Final drive | 2 helical gear |
| Max drawbar pull | 36,082 lbs (16,366 kg) |
| Parking brakes | Heavy-duty, spring-applied, |
Electrical System
| Alternator | 90 amp |
| Battery | 12-volt low-maintenance |
Engine
| Displacement | 275 cu in (4,502 cu cm) |
| Emission Tier Level | Tier3 |
| Engine Model | Case 445TA/EG7a |
| Fan | 20 in,(500 mm)Diameter |
| Fuel | 2 Diesel |
| Fuel tank | 41 gal (155 l) |
| Gross Power | 81 hp (60 kw) |
| Net Power | 74 hp (55 kw) |
| Power Measured @ | 2000 rpm |
| Pump operating angles – Fore and aft | 45 degrees |
| Pump operating angles -Side-to-side | 45 degrees |
| Transmission Type | Hydrostatic |
Hydraulic System
| Lift cylinder – Rod diameter | 2 in (5 cm) |
| Lift cylinder – Stroke | 16 in (40 cm) |
| Lift cylinder(s) | 2 |
| Lift cylinder-Bore diameter | 4 in (9 cm) |
| Pump Flow Capacity | 21 gpm (79 lpm) |
| Pump type | Variable Displacement Piston |
Operating Specifications
| center rock guard | 340 lbs (154 kg) |
| Long track | 16,248 lbs (7,370 kg) |
| Low ground pressure | 17,547 lbs (7,959 kg) |
| Operating Weight | 17,547 lbs (7,959 kg) |
| Sweeps | 110 lbs (50 kg) |
| Winch | 1,001 lbs (454 kg) |
Performance
| Pump Flow | 20 gpm (77 lpm) |
Standard Blade
| Blade Angle (both directions) | 25 degrees |
Transmission
| Max Speed – Forward | 6 mph (9 kph) |
| Max Speed – Reverse | 6 mph (9 kph) |
Undercarriage
| Number of bottom rollers per side | 6 |
| Number of Upper Rollers | 1 |
| Width of Shoes | 27 in (69 cm) |
