Contents
Articulating/Rigid
Articulating/Rigid | Articulated |
Body Capacities
Heaped (SAE 2:1) | 23 cu yd (18 cu m) |
Struck | 17 cu yd (13 cu m) |
Tailgate Heaped SAE 2:1 | 25 cu yd (19 cu m) |
Tailgate Struck | 18 cu yd (14 cu m) |
Body Hoist
Lower Time | 8 seconds |
Raise Time | 12 seconds |
Body Plate
Body Plate Type | High strength Brinell HB450 wear resistant steel |
Body Plate Thickness
Base | 1 in (2 cm) |
Front | 0 in (1 cm) |
Scow | 1 in (2 cm) |
Side | 1 in (1 cm) |
Dimensions
Dump Ground Clearance | 2 ft (1 m) |
Dump Height | 21 ft (7 m) |
Ground Clearance | 2 ft (1 m) |
Overall Height | 11 ft (3 m) |
Overall Length | 33 ft (10 m) |
Overall Width | 10 ft (3 m) |
Wheelbase | 15 ft (5 m) |
DRIVE SYSTEM
Drive Config | 6×6 |
Dump
Capacity – Heaped | 22 cu yd (17 cu m) |
Capacity – Struck | 17 cu yd (13 cu m) |
Lower Time | 12 seconds |
Raise Time | 12 seconds |
Rated Payload | 61,950 lbs (28,100 kg) |
Engine
Aspiration | Turbochaarged |
Bore | 5 in (13 cm) |
Displacement | 763 cu in (12,500 cu cm) |
Engine Model | Cat C13 ACERT |
Engine Model – U.S. EPA Tier 4 Final/EU Stage IV | Cat C13 ACERT |
Gross Power | 329 hp (245 kw) |
Gross Power – SAE J1995 | 375 hp (280 kw) |
Make | Cat |
Model | 3196C ATAAC |
Net Power | 325 hp (242 kw) |
Net Power – EEC 80/1269 | 321 hp (239 kw) |
Net Power – ISO 14396 | 370 hp (276 kw) |
Net Power – ISO 9249 | 321 hp (239 kw) |
Net Power – SAE J1349 | 367 hp (274 kw) |
Number of Cylinders | 6 |
Peak Engine Torque Gross (SAE J1995) | 1,579 lbs ft (2,141 nm) |
Peak Engine Torque Net (SAE J1349) | 1,564 lbs ft (2,120 nm) |
Peak Engine Torque Speed | 1200 rpm |
Stroke | 6 in (16 cm) |
Operating Specifications
Cooling System Fluid Capacity | 23 gal (85 l) |
Engine Oil Capacity | 10 gal (37 l) |
Fuel Capacity | 95 gal (360 l) |
Hydraulic System Fluid Capacity | 27 gal (102 l) |
Tire Size | 23.5R25 |
Transmission Fluid Capacity | 10 gal (36 l) |
Operating Weights
Center Axle – Empty | 10,053 lbs (4,560 kg) |
Center Axle – Loaded | 37,302 lbs (16,920 kg) |
Center Axle – Rated Load | 27,249 lbs (12,360 kg) |
Front Axle – Empty | 33,069 lbs (15,000 kg) |
Front Axle – Loaded | 40,300 lbs (18,280 kg) |
Front Axle – Rated Load | 7,231 lbs (3,280 kg) |
Rear Axle – Empty | 9,568 lbs (4,340 kg) |
Rear Axle – Loaded | 36,817 lbs (16,700 kg) |
Rear Axle – Rated Load | 27,249 lbs (12,360 kg) |
Total – Empty | 52,690 lbs (23,900 kg) |
Total – Loaded | 114,420 lbs (51,900 kg) |
Total – Rated Load | 61,729 lbs (28,000 kg) |
Service Refill Capacities
Cooling System | 22 gal (83 l) |
DEF Tank | 5 gal (20 l) |
Engine Crankcase | 10 gal (38 l) |
Final Drives/Differential | 33 gal (125 l) |
Fuel Tank | 109 gal (412 l) |
Hydraulic System | 29 gal (110 l) |
Output Transfer Gear Box | 6 gal (24 l) |
Transmission | 12 gal (47 l) |
Sound Levels
Interior Cab | 72 dB(A) |
Standards
Brakes | ISO 3450 2011 |
Cab – FOPS | ISO 3449 Level II 2005 |
Cab – ROPS | ISO 3471 2008 |
Steering | ISO 5010 2007 |
Steering System
Lock to Lock | 4.75 seconds @ 60 rpm |
Transmission
Forward – 1 | 5 mph (8 kph) |
Forward – 2 | 9 mph (14 kph) |
Forward – 3 | 14 mph (23 kph) |
Forward – 4 | 21 mph (34 kph) |
Forward – 5 | 29 mph (47 kph) |
Forward – 6 | 34 mph (55 kph) |
Max Speed | 34 mph (55 kph) |
Number of Forward Gears | 6 |
Number of Reverse Gears | 1 |
Reverse – 1 | 6 mph (10 kph) |
Turning Circle
Turning Dimensions – Aisle Width | 210 in (533 cm) |
Turning Dimensions – Clearance Radius | 318 in (808 cm) |
Turning Dimensions – Inside Radius | 153 in (389 cm) |
Turning Dimensions – SAE Turning Radius | 294 in (747 cm) |
Weights
Center Axle – empty | 11,023 lbs (5,000 kg) |
Center Axle – loaded | 39,022 lbs (17,700 kg) |
Front Axle – empty | 28,969 lbs (13,140 kg) |
Front Axle – loaded | 34,965 lbs (15,860 kg) |
Operating Weight | 109,600 lbs (49,714 kg) |
Rear Axle – empty | 10,384 lbs (4,710 kg) |
Rear Axle – loaded | 38,383 lbs (17,410 kg) |
Total Empty | 50,376 lbs (22,850 kg) |
Total Loaded | 112,370 lbs (50,970 kg) |