Contents
Articulating/Rigid
Articulating/Rigid | Articulated |
Dimensions
Dump Ground Clearance | 2 ft (1 m) |
Dump Height | 20 ft (6 m) |
Ground Clearance | 1 ft (0 m) |
Overall Height | 12 ft (4 m) |
Overall Length | 32 ft (10 m) |
Overall Width | 7 ft (2 m) |
Wheelbase | 17 ft (5 m) |
DRIVE SYSTEM
Drive Config | 6×6 |
Dump
Capacity – Heaped | 20 cu yd (16 cu m) |
Capacity – Struck | 16 cu yd (13 cu m) |
Dump Angle | 65 degrees |
Lower Time | 7.5 seconds |
Raise Time | 12 seconds |
Rated Payload | 55,115 lbs (25,000 kg) |
Engine
Aspiration | turbocharged |
Displacement | 660 cu in (10,815 cu cm) |
Engine Model | QSM 11 |
Gross Power | 365 hp (272 kw) |
Make | Cummins |
Max Torque | 1,234 lbs ft (1,673 nm) |
Model | QSM 11 |
Net Power | 335 hp (250 kw) |
Number of Cylinders | 6 |
Power Measured @ | 2100 rpm |
Torque Measured @ | 1400 rpm |
Operating Specifications
Alternator Supplied Amperage | 70 amps |
Cooling System Fluid Capacity | 15 gal (55 l) |
Engine Oil Capacity | 6 gal (22 l) |
Fuel Capacity | 103 gal (390 l) |
Hydraulic System Fluid Capacity | 53 gal (202 l) |
Operating Voltage | 24 volts |
Tire Size | 23.5R25 |
Transmission Fluid Capacity | 17 gal (63 l) |
Transmission
Max Speed | 31 mph (51 kph) |
Number of Forward Gears | 6 |
Number of Reverse Gears | 3 |
Transmission Type | ZF 6WG 260 RPC fully automatic |
Weights
Center Axle – empty | 11,400 lbs (5,171 kg) |
Center Axle – loaded | 34,325 lbs (15,570 kg) |
Front Axle – empty | 25,240 lbs (11,449 kg) |
Front Axle – loaded | 34,435 lbs (15,619 kg) |
Operating Weight | 103,395 lbs (46,899 kg) |
Rear Axle – empty | 11,640 lbs (5,280 kg) |
Rear Axle – loaded | 34,635 lbs (15,710 kg) |
Total Empty | 48,280 lbs (21,899 kg) |
Total Loaded | 103,395 lbs (46,899 kg) |