Case SR200 Skid Steer Loader

Dimensions

Clearance at Max Lift and Dump 8 ft (3 m)
Ground Clearance 8 in (20 cm)
Height – Top of Cab 7 ft (2 m)
Length w/o Bucket 9 ft (3 m)
Length with Bucket 11 ft (3 m)
Reach at Max Lift and Dump 20 in (52 cm)
Turning Radius from Center – inc bucket 80 in (203 cm)
Turning Radius from Center – machine rear 63 in (160 cm)
Wheelbase 4 ft (1 m)
Width Over Tires 5 ft (2 m)

Engine

Aspiration Turbocharged
Displacement 195 cu in (3,195 cu cm)
Engine Model 432T/M3
Gross Power 70 hp (52 kw)
Max Torque 203 lbs ft (275 nm)
Number of Cylinders 4
Power Measured @ 2500 rpm
Torque Measured @ 1400 rpm

Hydraulic System

Pump Flow Capacity 8 gpm (31 lpm)
Pump Type Gear
Relief Valve Pressure 3000 psi

Loader

Bucket Capacity 1 cu yd (0 cu m)
Bucket Width 66 in (168 cm)
Operating Load Rating 2,000 lbs (907 kg)
Operating Width 64 in (163 cm)
Tipping Angle 4000 degrees

Operating Specifications

Alternator Supplied Amperage 95 amps
Chain Box Fluid Capacity – each side 2 gal (7 l)
Engine Oil Fluid Capacity 3 gal (10 l)
Fuel Capacity 20 gal (76 l)
Hydraulic System Fluid Capacity 5 gal (20 l)
Max Speed 12 mph (19 kph)
Operating Speed 7 mph (12 kph)
Operating Voltage 12 volts
Operational Weight 6,900 lbs (3,130 kg)
Tire Size 10 x 12.5
Ask A Question