Caterpillar 950H Wheel Loader

Axles

Front Fixed front
Maximum Single-Wheel Rise and Fall 19 in (47 cm)
Rear Oscillating +/- 13?

Brakes

Brakes Meets required standards.

Bucket

Breakout Force 37,125 lbs (16,840 kg)
Breakout Force – Reference Bucket 37,125 lbs (16,840 kg)
Bucket Capacities 5 cu yd (3 cu m)
Bucket Capacity – heaped 4 cu yd (3 cu m)
Bucket Capacity – struck 4 cu yd (3 cu m)
Bucket Width 10 ft (3 m)
Dump Clearance at Max Raise 10 ft (3 m)
Maximum Bucket Capacity 5 cu yd (3 cu m)
Reference Bucket Capacity 4 cu yd (3 cu m)
Type – Reference bucket General purpose

Cab

ROPS/FOPS Meets SAE and ISO standards.

Dimensions

B-Pin Height – Standard 13 ft (4 m)
Centerline of Rear Axle to Hitch 66 in (168 cm)
Centerline Rear Axle to Edge of Counterweight 7 ft (2 m)
Dump Angle at Maximum Lift 48.2 degrees
Ground Clearance 1 ft (0 m)
Height – Top of Cab 11 ft (3 m)
Height – Top of Exhaust 133 in (337 cm)
Height – Top of Hood 97 in (246 cm)
Height – Top of ROPS/FOPS 11 ft (3 m)
Hinge Pin – Max Height 13 ft (4 m)
Length with Bucket on Ground 26 ft (8 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheel Base 11 ft (3 m)
Wheelbase 11 ft (3 m)
Width Over Tires 9 ft (3 m)

Engine

Bore 4 in (11 cm)
Displacement 439 cu in (7,194 cu cm)
Engine Model Cat C7 ACERT
Flywheel Power 197 hp (147 kw)
Gross Power 217 hp (162 kw)
Gross Power – SAE J1995 217 hp (162 kw)
Make Cat
Model C7
Net Power 197 hp (147 kw)
Net Power – 80/1269/EEC 197 hp (147 kw)
Net Power – ISO 9249 197 hp (147 kw)
Net Power – SAE J1349 195 hp (145 kw)
Number of Cylinders 6
Peak Torque – 1,400 rpm – Net 669 lbs ft (907 nm)
Power Measured @ 1800 rpm
Stroke 5 in (13 cm)

Hydraulic System

Bucket/Work Tool System – Pump Output 71 gpm (269 lpm)
Dump Time 1.3 seconds
Hydraulic Cycle Time – Dump 1.3 seconds
Hydraulic Cycle Time – Lower, Empty, Float Down 2.5 seconds
Hydraulic Cycle Time – Raise 6.2 seconds
Hydraulic Cycle Time – Total 10 seconds
Lower Time 2.5 seconds
Pump Flow Capacity 71 gpm (269 lpm)
Pump Type Piston
Raise Time 6.2 seconds
Relief Valve Setting 1000 psi
Steering System – Pump Type Piston

Operating Specifications

Alternator Supplied Amperage 80 amps
Breakout Force 37,125 lbs (16,840 kg)
Cooling System Fluid Capacity 11 gal (42 l)
Dump Clearance 10 ft (3 m)
Engine Oil Fluid Capacity 8 gal (30 l)
Front Axle/Diff Fluid Capacity 10 gal (36 l)
Fuel Capacity 83 gal (314 l)
Hydraulic System Fluid Capacity 29 gal (110 l)
Operating Voltage 24 volts
Operating Weight 40,435 lbs (18,341 kg)
Rated Bucket Capacity 5 cu yd (3 cu m)
Rear Axle Oscillation 26 degrees
Rear Axle/Diff Fluid Capacity 10 gal (36 l)
Static Tipping Weight 27,483 lbs (12,466 kg)
Tire Size 23.5R25
Transmission Fluid Capacity 9 gal (34 l)
Turning Radius 23 ft (7 m)

Service Refill Capacities

Cooling System 11 gal (42 l)
Crankcase 8 gal (30 l)
Differential – Final Drives – Front 10 gal (36 l)
Differential – Final Drives – Rear 10 gal (36 l)
Fuel Tank – Standard 83 gal (314 l)
Hydraulic Tank 29 gal (110 l)
Transmission 9 gal (34 l)

Tires

Tires Choose from a variety of tires to match your application.

Transmission

Forward – 1 4 mph (7 kph)
Forward – 2 8 mph (13 kph)
Forward – 3 14 mph (22 kph)
Forward – 4 23 mph (37 kph)
Max Speed – Forward 23 mph (37 kph)
Max Speed – Reverse 25 mph (40 kph)
Number of Forward Gears 4
Number of Reverse Gears 4
Reverse – 1 5 mph (8 kph)
Reverse – 2 9 mph (14 kph)
Reverse – 3 15 mph (24 kph)
Reverse – 4 25 mph (40 kph)
Transmission Type Powershift

Weights

Operating Weight 40,435 lbs (18,341 kg)
Operational Weight 40,202 lbs (18,235 kg)
Ask A Question