Contents
Axles
| Front | Fixed front |
| Maximum Single-Wheel Rise and Fall | 19 in (47 cm) |
| Rear | Oscillating +/- 13? |
Brakes
| Brakes | Meets required standards. |
Bucket
| Breakout Force | 33,075 lbs (15,003 kg) |
| Breakout Force – Reference Bucket | 40,466 lbs (18,355 kg) |
| Bucket Capacities | 5 cu yd (4 cu m) |
| Bucket Capacity – heaped | 5 cu yd (3 cu m) |
| Bucket Capacity – struck | 4 cu yd (3 cu m) |
| Bucket Width | 10 ft (3 m) |
| Maximum Bucket Capacity | 5 cu yd (4 cu m) |
| Reference Bucket Capacity | 4 cu yd (3 cu m) |
| Type – Reference bucket | General purpose |
Cab
| ROPS/FOPS | Meets SAE and ISO standards. |
Dimensions
| B-Pin Height – Standard | 13 ft (4 m) |
| Centerline of Rear Axle to Hitch | 66 in (168 cm) |
| Centerline Rear Axle to Edge of Counterweight | 7 ft (2 m) |
| Ground Clearance | 1 ft (0 m) |
| Height – Top of Cab | 11 ft (3 m) |
| Height – Top of Exhaust | 133 in (337 cm) |
| Height – Top of Hood | 97 in (246 cm) |
| Height – Top of ROPS/FOPS | 11 ft (3 m) |
| Hinge Pin – Max Height | 13 ft (4 m) |
| Length with Bucket on Ground | 27 ft (8 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheel Base | 11 ft (3 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Bore | 4 in (11 cm) |
| Displacement | 439 cu in (7,194 cu cm) |
| Engine Model | Cat C7 ACERT |
| Flywheel Power | 211 hp (157 kw) |
| Gross Power | 230 hp (172 kw) |
| Gross Power – SAE J1995 | 230 hp (172 kw) |
| Make | Cat |
| Model | C7 |
| Net Power | 211 hp (157 kw) |
| Net Power – 80/1269/EEC | 211 hp (157 kw) |
| Net Power – ISO 9249 | 211 hp (157 kw) |
| Net Power – SAE J1349 | 209 hp (156 kw) |
| Number of Cylinders | 6 |
| Peak Torque – 1,400 rpm – Net | 669 lbs ft (907 nm) |
| Power Measured @ | 1800 rpm |
| Stroke | 5 in (13 cm) |
Hydraulic System
| Bucket/Work Tool System – Pump Output | 71 gpm (269 lpm) |
| Dump Time | 1.3 seconds |
| Hydraulic Cycle Time – Dump | 1.3 seconds |
| Hydraulic Cycle Time – Lower, Empty, Float Down | 2.5 seconds |
| Hydraulic Cycle Time – Raise | 6.2 seconds |
| Hydraulic Cycle Time – Total | 10 seconds |
| Lower Time | 2.5 seconds |
| Pump Flow Capacity | 71 gpm (269 lpm) |
| Pump Type | piston |
| Raise Time | 6.2 seconds |
| Relief Valve Setting | 1000 psi |
| Steering System – Pump Type | Piston |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Breakout Force | 33,075 lbs (15,003 kg) |
| Cooling System Fluid Capacity | 11 gal (42 l) |
| Engine Oil Fluid Capacity | 8 gal (30 l) |
| Front Axle/Diff Fluid Capacity | 10 gal (36 l) |
| Fuel Capacity | 83 gal (314 l) |
| Hydraulic System Fluid Capacity | 29 gal (110 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 42,700 lbs (19,368 kg) |
| Rated Bucket Capacity | 5 cu yd (4 cu m) |
| Rear Axle Oscillation | 26 degrees |
| Rear Axle/Diff Fluid Capacity | 10 gal (36 l) |
| Static Tipping Load – Full Turn | 26,676 lbs (12,100 kg) |
| Static Tipping Weight | 30,603 lbs (13,881 kg) |
| Tire Size | 23.5R25 |
| Transmission Fluid Capacity | 9 gal (34 l) |
| Turning Radius | 23 ft (7 m) |
Service Refill Capacities
| Cooling System | 11 gal (42 l) |
| Crankcase | 8 gal (30 l) |
| Differential – Final Drives – Front | 10 gal (36 l) |
| Differential – Final Drives – Rear | 10 gal (36 l) |
| Fuel Tank – Standard | 83 gal (314 l) |
| Hydraulic Tank | 29 gal (110 l) |
| Transmission | 9 gal (34 l) |
Tires
| Tires | Choose from a variety of tires to match your application. |
Transmission
| Forward – 1 | 4 mph (7 kph) |
| Forward – 2 | 8 mph (13 kph) |
| Forward – 3 | 14 mph (23 kph) |
| Forward – 4 | 24 mph (38 kph) |
| Max Speed – Forward | 24 mph (38 kph) |
| Max Speed – Reverse | 25 mph (40 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Reverse – 1 | 5 mph (8 kph) |
| Reverse – 2 | 9 mph (14 kph) |
| Reverse – 3 | 15 mph (24 kph) |
| Reverse – 4 | 25 mph (40 kph) |
| Transmission Type | Powershift |
Weights
| Operating Weight | 42,700 lbs (19,368 kg) |
| Operational Weight | 42,358 lbs (19,213 kg) |
