John Deere 824K Z-Bar Wheel Loader

Bucket

Breakout Force 41,678 lbs (18,905 kg)
Bucket Capacity – heaped 6 cu yd (5 cu m)
Bucket Capacity – struck 5 cu yd (4 cu m)
Bucket Width 11 ft (3 m)
Dump Clearance at Max Raise 11 ft (3 m)

Dimensions

Ground Clearance 2 ft (0 m)
Height – Top of Cab 12 ft (4 m)
Hinge Pin – Max Height 15 ft (4 m)
Length with Bucket on Ground 30 ft (9 m)
Reach at Max Lift and Dump 4 ft (1 m)
Wheelbase 11 ft (3 m)
Width Over Tires 10 ft (3 m)

Engine

Aspiration Turbocharged charge air cooled
Displacement 824 cu in (13,503 cu cm)
Engine Model 6135H, Tier III certified
Make John Deere
Model 6135H
Net Power 333 hp (248 kw)
Number of Cylinders 6
Power Measured @ 1600 rpm
Torque Measured @ 900 rpm
Torque Rise 59%

Hydraulic System

Dump Time 1.3 seconds
Lower Time 2.5 seconds
Pump Flow Capacity 136 gpm (513 lpm)
Pump Type two variable displacement, load-sensing axial piston
Raise Time 5.9 seconds
Relief Valve Setting 3650 psi

Operating Specifications

Alternator Supplied Amperage 80 amps
Cooling System Fluid Capacity 13 gal (48 l)
Engine Oil Fluid Capacity 10 gal (38 l)
Front Axle/Diff Fluid Capacity 12 gal (46 l)
Fuel Capacity 124 gal (470 l)
Hydraulic System Fluid Capacity 42 gal (159 l)
Operating Voltage 24 volts
Operating Weight 57,783 lbs (26,210 kg)
Rated Bucket Capacity 6 cu yd (5 cu m)
Rear Axle Oscillation 26 degrees
Rear Axle/Diff Fluid Capacity 12 gal (46 l)
Static Tipping Weight 45,212 lbs (20,508 kg)
Tire Size 26.5 R 25
Transmission Fluid Capacity 7 gal (28 l)
Turning Radius 20 ft (6 m)

Transmission

Max Speed – Forward 25 mph (40 kph)
Max Speed – Reverse 19 mph (30 kph)
Number of Forward Gears 4
Number of Reverse Gears 3
Transmission Type Countershaft, powershift

Weights

Operational Weight 57,783 lbs (26,210 kg)
Ask A Question